Phoenix Model Spitfire 30cc Gas/EP ARF 70.8"

Tower Stock# LXGBMS  •  Manufacturer Stock# PH151
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 5 (see larger view)
Money Saving Combos
Money Saving Combos
Notes from our tech department:
This is the Phoenix Model Radio Controlled 20-30cc Glow or Electric Powered
1/6 scale Almost Ready to Fly Spitfire Airplane.
For Intermediate Pilots.


Construction: Balsa and ply
Wing: One-piece, with ailerons and flaps, 21.5" (546mm) long,
1.26" (32.1mm) diameter aluminum joiner tube
Cowl: Painted fiberglass
Covering: High quality heat shrink covering
Landing Gear: Retracts with CNC machined metal struts, spring tail
Wheels: 3.25" (82.5mm) main, 1.25" (32mm) tailwheel
Spinner: Red plastic 3.7" (95mm) diameter
Top Hatch: Removes for easy access to battery and radio equipment
Engine Mount: Two-piece composite
Motor Mount: Plywood
Fuel Tank: Approximately 14oz (420cc)
Warranty Period: 90 day limited warranty


Prebuilt Wing, Fuselage and Tail Assemblies, Retracts, Main Wheels
Tailwheel, Spinner, Engine Mount, Motor Mount, Instruction Manual,
Fuel Tank, Decal Sheet


Gasoline Power;
Engine: 30cc
2-cycle oil, ignition battery

Electric Power;
Brushless Motor: Great Planes Rimfire 1.20 recommended
ESC: 80A if using the Rimfire 1.20 motor listed above
LiPo Battery: 5-6 cells, 5500 - 6000mAh
Charger, charging bag

Propeller: Compatible with selected engine or motor
Radio: 6-channel minimum
Servos: 7 standard size, high-torque, 2-aileron; 2-flap; 1-elevator
1-rudder; 1 throttle (if using gas engine)
Retract Gear Servos: Two, Futaba S3170G recommended
Receiver Battery: 4.8-6V / 2000mAh NiMH
Field and maintenance equipment


Wingspan: 70.8" (1800mm)
Length: 61.9" (1572mm)
Flying Weight: 12.8-13.7lbs (5.8-6.2g)
Wing Area: 5.7 sq ft (53.4 sq dm)
Wing Loading: 35.4oz/sq ft (108g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21mm x 42mm)
Center of Gravity (CG): 4.7" (120mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.43" (11mm) 12% expo 0.51" (13mm) 10% expo
Elevator, up/down: 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo
Flap, Mid 0.59" (15mm) down, Landing 0.79" (20mm) down


If a replacement fuel tank is needed the DuBro 14oz Fuel Tank
DUBQ0214 can be used. Some trimming and modification may be
required when installing aftermarket fuel tank.

jxs 07/13/16

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info