Tamiya 1/10 Plasma Edge 4WD DF-02 Kit

Tower Stock# LXTDR5  •  Manufacturer Stock# 58399
Tamiya 1/10 Plasma Edge 4WD DF-02 Kit (large view)
Notes from our tech department:
This is the 1/10 scale electric powered, radio controlled, 4 wheel drive
Tamiya Plasma Edge Off-Road Buggy kit.


Chassis: ABS plastic DF-02 bathtub style
Drive: Four wheel shaft drive
Motor: 540 size
Electronic Speed Control: Tamiya TEU-101BK with reverse
Shocks: Four oil-filled plastic bodied with 5mm ball connectors
Gearboxes: Front and rear sealed, ball bearing equipped
Differentials: Planetary metal gears
Transmission: Single-speed
Body: Polycarbonate buggy, clear and untrimmed
Tires: Spike, 3.4" (86mm) outer diameter, 2.2" (56mm) inner diameter
Rear Width, 1.5" (38mm), Front Width, 1.2" (30mm)
Wheels: One piece, white in color 2.1" (54mm) diameter
Rear Width, 1.1" (29mm), Front Width, 0.94" (24mm)
Bumpers: Plastic, front and rear
Suspension: Front and rear double wishbone four wheel independent
Camber: Non adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable steering tie rods, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis
Steering: Bell-crank type with servo saver


Tamiya 1/10 scale Plasma Edge Buggy with oil-filled shocks, 540
motor, clear buggy body, tires, wheels, 19 tooth pinion gear,
decal sheet, ESC, 70 tooth spur gear and instructions


Radio: 2-Channel with 1 standard size steering servo
Radio Batteries: (8) AA size
Battery: 6-cell stick with Tamiya type connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment


Length: 15.7" (400mm)
Width: 9.8" (249mm)
Height: 6.7" (170mm)
Weight: 2.6 lbs (1195g) approx.
Length: 11.75" (298mm)
Width: 5.7" (146mm) ahead of rear wheels (widest point)
2" (51mm) at front wheels (thinnest point)
Height: 3.5" (89mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Rear Diff 1 DTXC1547
1 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Drive Shaft 1 DTXC1547
2 5x11mm Front Axles 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547

To paint body to match photo on box use Tamiya PS-49 Polycarb spray
Metallic Blue (TAMR8649) and PS-5 Black (TAMR8605)

jxs 1/17/08

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info