Associated B6.1DL Team Kit Limited Edition

Tower Stock# LXLMWZ  •  Manufacturer Stock# ASC90021L
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($106.67, $106.66, $106.66) Details
Notes from our tech department:

FEATURES

Chassis: 7075 aluminum, 0.12" (3mm) thick
Drive: Rear wheel with heavy duty V2 rear axles with 67mm bones,
laser etching on front axles, lightweight aluminum top shaft
Differential: Ball type, adjustable height
Transmission: 3-gear Laydown Stealth for lower and forward center of
gravity
Slipper Clutch: New slipper assembly for better balance and shock
clearance
Shocks: Machined pistons for smoother operation, V2 springs
Shock Towers: Heavy duty V2 routed graphite
Steering: Gull wing shaped suspension arms and +1 Ackermann plates
for a sharp feel and more control, Ackermann refers to the effect
of the inner front wheel turning faster than the outer front wheel
during turns
Body: JConcepts B6 lightweight clear body and wing
Ball Bearings: Factory Team upgraded bearing kit
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, aluminum C and D arm mounts for anti-squat and toe
adjustments
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle,
easy insert system adjusts camber link position and rear axle
height

INCLUDES

1/10 scale Team Associated RC10B6.1DL Team Buggy Kit with Clear Body
and Wing, Shocks, Ball Bearings, Lay Down Stealth Transmission
and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Motor: 540 size
ESC: To match selected motor
Tires and Wheels: 1/10 scale buggy
Battery: 7.4 - 7.6V LiPo, 6.0V LiFe with "shorty" battery dimensions
Battery Charger: To match selected battery
Pinion Gear: 48 pitch
Polycarbonate safe spray or brush-on paint
Building and track equipment, charging bag if using LiPo batteries

SPECIFICATIONS

Final length, width and weight will vary based on electronics, tire
configuration, wing position and vehicle setup
Wheelbase: 10.9 - 11" (277 - 279mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Order Qty.
4 3x7x3mm Steering 2 Stock numbers for
4 5x10x4mm Steering Blocks 2 bearings can be found
4 5x10x4mm Gearbox 2 in the "Optional Parts
2 10x15x4mm Differential 1 & Accessories" section
2 10x15x4mm Rear Uprights 1
2 6x13x5mm Rear Uprights 1

jxs 04/07/19
ir/jxs

Resources

References

Manufacturer Contact Information