Kyosho 1/8 Inferno NEO ST Race Spec Nitro 4WD RTR

Tower Stock# LXFZDM  •  Manufacturer Stock# 33002T1B
  • Thumbnail 1 (see larger view)
  • Thumbnail 5 (see larger view)
Notes from our tech department:
This is the Glow Powered, 2.4GHz Radio Controlled, 1/8 scale
Inferno NEO Race Spec Stadium Truck.


Chassis: Aluminum 0.12" (3mm) thick, gun metal gray in color
Drive: Four wheel shaft
Engine: Kyosho KE25 with pull starter and slide valve carburetor
with two reducers, silver for break-in, and blue for normal running
Exhaust: Polished aluminum tuned pipe
Radio: 2.4GHz FHSS Kyosho KT-331P
Shocks: Oil-filled, plastic body
Wheels: Six spoke, black in color
Tires: Block pattern 2.6" (66mm) wide, 5.8" (148mm) diameter
Ball Bearings: Full set
Brake: Dual disc
Clutch: 3-shoe composite, 13 tooth steel clutch bell
Caster: Adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Inferno NEO Race Spec Truck with Radio, Engine, Tuned Pipe, Glow
Starter, 8.45oz (250cc) Fuel Bottle and Instruction Manual


Glow Fuel: Car blend with 10-30% nitro content (20% required for
D-Cells: Two for glow starter
AA-Cells: Eight, four for transmitter and four for receiver
Track and maintenence equipment


Length: 21.6" (550mm)
Width: 16.8" (427mm)
Height: 8.8" (225mm)
Wheelbase: 13.7" (355mm)
Weight: 8.3lbs (3750g)
Gear Ratio: 14.6:1
Front and Rear Tread: 11.4" (289mm) distance between center of tires
measured side-to-side

Length: 17.6" (448mm)
Width: 8.3" (210mm)
Height: 4.4" (111mm)


For Replacement Ball Bearings use:
Qty. Size Location Order Qty. Stock Number
3 8x16mm Fr Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
2 5x10mm Clutch 1 DTXC1535

jxs 03/28/16



Product Documents & Files

Manufacturer Contact Information