This is the Brushless Electric Powered, 2.4GHz Radio Controlled, RXR|
Calypso Glider from Flyzone.
This version includes motor, ESC and servos.
For beginning to experienced glider pilots.
Construction: Aero-cell foam, white in color with green and black
Aileron Control: Dual servo with flap option (SEE COMMENTS)
Motor: Brushless outrunner, 1300 Kv
Electronic Speed Control: 18A
Servos: Four micro (2-ailerons, 1-rudder, 1-elevator)
Battery Compartment: Located under canopy
Landing Gear: Landing wheel with nose and tail skid plates
Propeller: 9x5 folding design, black in color
Warranty: Flyzone guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
Flyzone Calypso Glider with Servos, ESC, Motor, and Instruction
LiPo Battery: 11.1V 1300mAh 15C
Wingspan: 73" (1855mm)
Wing Area: 526 sq in (33.9 sq dm)
Length: 47" (1195mm)
RTF Weight: 29oz (820g)
Center of Gravity (CG): 1/4" (6.5mm) ahead of spar
Control Throws: High Rate Low Rate
Elevator, Up/Down: 3/4" (19mm) 18° 1/2" (13mm) 12°
Rudder, Right/Left: 1" (25mm) 19° 3/4" (19mm) 14°
Ailerons, Up/Down: 5/8" (16mm) 19° 3/8" (10mm) 11°
Flap: 7/8" (22mm) 22°
Part # in manual for servo is incorrect.
Please use FLZA6013 - Flyzone Micro Servo Calypso
For optional flap installation you must upgrade to a minimum
5-channel radio system and purchase the following items;
Two Flap Servos, FLZA6013
One Flap Linkage Set, FLZA6008
One Y-Harness for Flap Servos, FUTM4130
Two 6" (150mm) Servo Wire Extensions, HCAM2000