Top Flite Giant P-47D Thunderbolt Gas RTC 2.6-4.0,85"

Tower Stock# LXZHK0  •  Manufacturer Stock# TOPA0710
Top Flite Giant P-47D Thunderbolt Gas RTC 2.6-4.0,85
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Shipping Note:Details
Shipping Note:$59.99 Surcharge
Easy Pay
Request 3 Payments ($216.67, $216.66, $216.66) Details
Notes from our tech department:
This is the radio controlled, gasoline powered, ready-to-cover
P47D Thunderbolt Giant Scale Sport Airplane from Top Flite.
For intermediate to advanced modeler/flyers with moderate low-wing experience.
IMAA Legal


Construction: Plywood and built-up balsa sheeting
Wings: One-piece with wing joiner
Cowl: Unpainted fiberglass
Landing Gear: Heavy duty fixed prebent wire
Wheels: Foam, two main and one tailwheel
Flap Control: Dual servo
Aileron Control: Dual servo
Cockpit: Plastic kit molded in white with instrument panel, left and
right control panels, seat, floor and control stick
Radial Engine Replica: Molded plastic
Engine Mount: PLywood firewall
Stabilizer: Aluminum tubes automatically align stab halves and reduce
workshop time
Building Time: Ready to fly in several hours
Spinner Hub: Two-piece aluminum
Hardware: Full set, IMAA legal
Warranty: Top Flite Models guarantees this kit free from defects
in material and workmanship at the date of purchase. Warranty
does not cover any component parts damaged by use or modification.


Pre-built fuselage and tail assemblies, decals, landing gear,
wheels, spinner hub, hardware package, fuel tank, replica radial
engine, cockpit kit and photo-illustrated instructions


Radio: 5 - 7 channel
Servos: 50 oz-in torque, 2 each for elevators, ailerons and flaps,
1 each rudder and throttle
Micro, 1 if retracts are installed
1 standard servo for optional choke
Four 6" (152mm) Servo Extensions: Throttle, optional choke, ailerons
and flaps
One 24" (609mm) Servo Extension: Ailerons
Four 6" (152mm) Y-Harness: Elevator, rudder/steering, ailerons and
Engine: 2.6 - 4.0 cu in (43 - 65cc) gasoline powered
Covering: 6 rolls
Building and Field Equipment: Tools, propeller, fuel filter, foam
rubber padding


Wingspan: 85" (2160mm)
Wing Area: 1329 inē (85.7 dmē)
Weight: 19.5-21.5 lb (8.84-9.75 kg)
Wing Loading: 34-37 oz/inē (104-113 g/dmē)
Length: 75" (1905mm)
Center of Gravity: 6-3/8" (162mm) back from the leading edge of the
wing at the fuselage
Control Throws- Low Rate High Rate
Elevator: Up & Down 1/2" (12.7mm) 8° 3/4" (19.1mm) 12°
Rudder: Right to Left 1-3/8" (35mm) 16° 1-7/8 (47mm) 22°
Ailerons: Up & Down 1/2" (12.7mm) 10° 3/4" (19.1mm) 15°
Flaps: 2-3/8" (60mm) 34° down


For optional retract landing gear, the following Robart components
are recommended:
ROBQ2305 Robart #157VRX Large-Scale Deluxe Air Control Kit
ROBQ2369 Robart #169 10' (254mm) Red & Purple Pressure Tubing
ROBQ1636 Robart Main Gear
ROBQ2225 Robart Tail Gear
ROBQ2395 Robart #190 Air Line Quick Disconnects

jxs 7/15/10

Know Before You Fly
Easy RC: Airplanes
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info