Hacker Model Bergfalke 2-Meter Sailplane ARF 78.74"

Tower Stock# LXGWFX  •  Manufacturer Stock# HC1229A
  • front/side (see larger view)
  • rear/side (see larger view)
  • bottom (see larger view)
  • packaging (see larger view)
Money Saving Combos
 
LZ0005
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Almost Ready to Fly,
Bergfalke 2-Meter Thermal and Slope Sailplane.
May be flown on a slope, or fitted with a switchable tow hook
(not included) for aerotowing. Note the second product manual link under
the Resources section of this web page links to manual that shows
how to fabricate a simple tow hook.

FEATURES

Construction: EPP (expanded polypropolene) and plywood, carbon fiber
reinforced elevator, rudder and fuselage, carbon pushrods, plywood
wing ribs
Covering: High quality film
Wing: Two-piece with dual servo aileron control
Landing Gear: Landing skid with 2" (51mm) diameter wheel, tail skid

INCLUDES

Wing, Fuselage and Tail Sections, Canopy, Landing Wheel, Pushrods
and Instruction Manual

REQUIREMENTS

Radio: At least 4-channel, with three 9-15g micro servos
Receiver Battery: At least 1900mAh
16" Servo Extensions: Four
8" Servo Extensions: Three
Glue: Thin CA with activator, contact cement
Building and field equipment

SPECIFICATIONS

Wingspan: 78.7" (2m) (2000mm)
Length: 38.2" (970mm)
Weight: 31oz (875g)
Center of Gravity (CG): 1.2 - 1.4" (30 - 35mm) back from the
leading edge of the wing measured at the fuselage, approximately
1.8 - 2.1oz (50 - 60g) of lead required for ballast
Control Throws- Basic Advanced
Elevator, up & down: 0.51" (13mm) 0.79" (20mm)
Rudder, right & left: 1.2" (30mm) 1.6" (40mm)
Ailerons, 1.2" (30mm) up, 0.79" (20mm) down 1.6" (40mm) up
0.98" (25mm) down

jxs 08/29/17
ir/jxs

Resources
Know Before You Fly
Easy RC: Sailplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info