Tamiya 1/10 XV-01 Chassis Long Damper Spec 4WD Kit

Tower Stock# LXGNRA  •  Manufacturer Stock# 47349
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the Electric Powered, Radio Controlled, 1/10 scale
XV-01 Long Damper Spec Chassis Kit from Tamiya.

Limited edition version of the versatile XV-01 chassis is set up to use long
dampers and provides an even greater off-road driving
experience, while still keeping the same base as the original XV-01.


Chassis: FRP fiber reinforced plastic
Drive: Four wheel dual belt drive
Differentials: Bevel gear
Motor: 540 size brushed
Steering: Long tie-rod system to reduce bump steer, high torque servo
Suspension: Fully independent double wishbone
Ball Bearings: Full set
Shocks: CVA mini, oil filled, plastic body
Shock Towers: 0.14" (3.5mm) thick fiber reinforced plastic, newly
designed to maximize perfomance of CVA shocks
Battery Access: Hatch on underside of chassis
Tires: Rally block 0.94" (24mm) wide, 2.6" (67mm) diameter, with foam
Wheels: 16 spoke white plastic, 1" (25.4mm) wide, 1.9" (48mm)
diameter, 12mm hex
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, front and rear caster/toe-in refers to the angle
of the suspension when viewed from the side of the car in relation
to the chassis
Bumper: Front, urethane foam
Spur Gear: 68 tooth plastic
Pinion Gear: 22 tooth steel


XV-01 Pro Chassis Kit with Shocks, Shock Oil, Tires, Foam Inserts,
Wheels, Decals, Spur Gear, Pinion Gear, 540 Motor and Instruction


Radio: 2-channel with high-torque steering servo
ESC: To match 540 brushed motor
Battery: 7.2V 6-cell stick pack with Standard connector
Battery Charger
Body: 1/10 scale on-road compatible with the XV-01 chassis such as
the #51289 Subaru Impreza WRC '07, #51364 Subaru Impreza WRC 2008
and the #51376 Mitsubishi Lancer Evo. X
Building and track equipment


Length: 15.1" (384mm)
Width: 7.3" (185mm)
Wheelbase: 10.1" (257mm)


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 4x8mm Idler Gear Shaft 1 DTXC1511
1 4x8mm Counter Gear 1 DTXC1511
1 5x10mm Counter Gear 1 DTXC1535
2 4x8mm Middle Shaft 1 DTXC1511
4 5x8mm Steering 2 DTXC1523
2 5x10mm Front Arms 1 DTXC1535
2 5x10mm Rear Arms 1 DTXC1535

jxs 04/14/17

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info