Phoenix Model Turbo Beaver GP/EP/Gas ARF 74.8"

Tower Stock# PMMA0385  •  Manufacturer Stock# PH155
Phoenix Model Turbo Beaver GP/EP/Gas ARF 74.8
Easy Pay
Request 3 Payments ($80.01, $79.99, $79.99) Details
Money Saving Combos
Money Saving Combos
 
LZ1686
 
LZ1687
 
LZ1700
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered,
Almost Ready to Fly Phoenix Model 1/7 scale Turbo Beaver Airplane.
For Intermediate Level Flyers.

**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES

Construction: Laser cut balsa and light plywood, hard points for
mounting float kit built into fuselage (float kit not included,
must be purchased separately)
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Cockpit: Operational doors, clear plastic windows and pilot figure
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Landing Gear: Scale main gear, spring wire for tail gear
Wheels: Three 2.5" (63.5mm) diameter foam
Fuel Tank w/pre-assembled stopper, approximately 14oz (420cc)
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Spinner: Plastic red in color 2.7" (70mm) diameter
Warranty Period: 90 day limited warranty

INCLUDES

ARF Phoenix Model Turbo Beaver with Landing Gear, Wheels, Fuel Tank,
Instrument Panel, Pilot, Spinner, Instruction Manual

REQUIREMENTS

For Glow Operation;
Engine: .91 2/stroke

For Gasoline Operation;
Engine: 15cc

For Electric Operation;
Brushless Motor: Rimfire 80
ESC: 60-100A
LiPo Battery: 6S up to 4000 - 5500mAh

Radio: 6-channel minimum
Servos: Seven standard (2-aileron; 2-flaps: 2-elevator; 1-rudder),
1-throttle if using gasoline or glow engine
Servo Extension: Two 12" (305mm) for aileron serrvos
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 800-1200mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

SPECIFICATIONS

Wingspan: 74.8" (1900mm)
Weight: 10.1 - 11lb (4600 - 5000g)
Length: 56.2" (1428mm)
Wing Area: 671 sq in (43.3 sq dm)
Wing Loading: 34.41 oz-sq/in (105 g-sq/dm)
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 2.6" (65mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- Low Rate High Rate
Elevator: 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder: 0.98" (25mm) 15% expo 1.6" (40mm) 15% expo
Ailerons: 0.43" (11mm) 10% expo 0.51" (13mm) 10% expo
Flap: 0.59-0.79" (15-20mm) down

jxs 04/18/16
ir/jxs

Resources
See Tower Catalog page 30.
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info