Brand Logo
5 out of 5 Customer Rating

D645MW Standard Digital High Torque Metal Gear Servo

Item No. HRC36645
Brand Logo
5 out of 5 Customer Rating

D645MW Standard Digital High Torque Metal Gear Servo

Item No. HRC36645
$43.99
RC Club points earned on this item shown at checkout.
In Stock
Selected Store

Product Details

The metal D-645MW is part of Hitec's D-Series servo line. All Hitec D-Series servos have been designed using Hitec's brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Key Features
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
icon-box
In The Box
  • (1) D645MW Standard Digital High Torque Metal Gear Servo
D645MW Standard Digital High Torque Metal Gear Servo

Highlights of the D-Series Servos

 

Product Specifications

Application 12-15lb Sport, 3D performance & scale airplanes, 2M & up sailplanes, 600mm electric helis, 50-59 class gas helis, 1:10 scale on/off-road vehicles, 1M & scale sail boats, 1/10 scale power boats
Bearing Dual Ball Bearing
Bushing Or Bearing Bearing
Connector Type Universal
Current Draw Idle 30mA
Current Draw Stall 2,650mA
Deadband 2µs
Gear Type Metal
Input Voltage 4.8V ~ 6.0V ~ 7.4V
Maximum Servo Speed 0.28 sec/60 deg @ 4.8V, 0.20 sec/60 deg @ 6.0V, 0.17 sec/60 deg @ 7.4V
Maximum Servo Torque 115oz/in @ 4.8V, 158oz/in @ 6.0V, 180oz/in @ 7.4V
Product Height 1.48" (38 mm)
Product Length 1.59" (40 mm)
Product Weight 2.11 oz (57.0g)
Product Width 0.77" (20 mm)
Programmable Yes
Servo Operating Voltage 4.8 - 7.4V (HV)
Servo Size Category Standard
Servo Type Digital
Spline Count 25 Teeth
Water-Resistant No
Wire Gauge 22 AWG