Wing Tote 42" Double Wing Bag

Tower Stock# WGTP0201  •  Manufacturer Stock# WGT201
Notes from our tech department:
This is the Wing Tote 42 Double Wing Bag.
Designed for RC planes with two separate wing panels.


Constructed of 600 Denier nylon, durable and water resistant
Pocket with Velcro flap for wing pole or joiner is located on front
of bag
Additional pocket on back of bag to carry extra props
Inside is lined with heavy fleece to protect plane covering
38 (10mm) thick closed cell foam between outer nylon and inner
Center also has layer of 38 (10mm) thick closed cell foam enclosed
in fleece and secured by Velcro that separates the two wings
Woven shoulder straps are spaced to balance on modelers shoulder
with 1-12 (38mm) webbing for comfort, also has lower horizontal
Two zippers go around three sides to allow wing to be inserted easily
zippers dont go completely around the sides reducing the chance of
wing falling out in case bag is accidentally left open


One Wing Tote 42 Double Wing Bag


Length: 42 (1066mm)
Width at Wide End: 22 (559mm)
Width at Narrow End: 14 (356mm)

jxs 3105
updt jxs 63006
updt jxs 052711



Manufacturer Contact Information