O.S. Flex Pipe FT-300 120mm 1114A

Tower Stock# OSMG2685  •  Manufacturer Stock# 72108200
Notes from our tech department:
This flexible tubing replaces your existing header and allows you to
re-route your exhaust farther away from the engine or cowl.

This ONLY fits the following engine(s):
FT-240, FT-300 , and FS-120 Surpass (with OSMG2629 adaptor)

Features: Reroutes the exhaust to a more convenient location
Comes in 2 lengths 120mm (this one) and 240mm (OSMG2675)

Includes: One flexible exhaust tube
Two pipe nuts

Specs: Length (neglecting threaded part): 120mm (4.72")
Length (overall): 143mm (5.63")
Thread Size on Nut: 10.5mm at one end and 13.5mm at the other
Diameter of Flex Pipe: 15mm (.59")

*** SCROLL FOR MORE INFO ***
Comments:
This pipe should NOT be bent in a diameter that is less than 4 times the
radius of the pipe (44mm or 1.73")
Bends in the pipe should be as far as possible AWAY from the threaded part
of the pipe. Final adjustment should be made in steps of only 2-3 at
a time. Repeated adjustment to alter the shape of the pipe will
weaken the pipe and cause it to break.
JBN 3.28.94
ir/jl

Resources

References

Manufacturer Contact Information