O.S. Speed B21 Ty Tessmann II Engine

Tower Stock# OSMG2086  •  Manufacturer Stock# 1A209
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Quantity Discounts Available
L5GXDD02
Save $45.00
2 for $954.98
Notes from our tech department:
This is the O.S. Engines Speed Tuned B21
Ty Tessmann II 1/8 scale Buggy Engine.

****** Because of the expressed racing nature of this engine, ******
****** it is NOT covered by the O.S. 2 Year Warranty ******

FEATURES

Special 5.8mm carb restrictor supplied by O.S. to Ty for extending
run time in competition
Low profile cylinder head with new shape and double height vertical
fins compared to latest model of the B2102
Ty Tessmann's name is etched into the cylinder head, crankcase and
crankshaft
Silicone filled crankshaft with DLC (diamond like coating) with
balanced tungsten weights and optimal intake timing
slide valve carburetor

INCLUDES

Speed Tuned B21 1/8 scale Ty Tessmann II Buggy Engine
Carburetor with 5.8mm Carb Reducer
P3 Turbo Glow Plug
3mm, 16mm and 18mm Dust Caps
Exhaust Seal Ring
Instruction manual

REQUIREMENTS

Glow fuel: 10-30% nitro content, 20% recommended for break-in
Exhaust system depending on vehicle
Glow igniter and track equipment

SPECIFICATIONS

Displacement: 0.211 cu in (3.49cc)
Bore: 0.646" (16.4mm)
Stroke: 0.646" (16.4mm)
Practical RPM: 4,000-42,000 RPM
Output: 2.65ps 2.61hp @ 34,000RPM
Weight: 12.59oz (356g)
Distance Between Mounting Hole Centers Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Height Bottom of Mounting Tabs/Top of Cylinder Head: 3.2" (82.6mm)
Width of Mounting Tabs: 1.8" (45mm)
Distance from Backplate to Front Bearing: 2.5" (64.5mm)
Distance from Center of Crankcase to Front Bearing: 1.7" (44mm)
Distance from Center of Crankcase to Backplate: 0.81" (20.5mm)
Crankshaft Size: UNF1/4-28
Crankshaft Length: 1.2" (29.5mm) front front bearing
Carburetor Settings: NOTE carburetor is preset at factory and
requires only very small adjustments
Needle Valve, 3-1/4 open from fully closed
Mixture Control Valve, Flush with carburetor body
Metering Needle, Flush with ball link body
Throttle Stop Screw, Approximately 0.5mm

jxs 12/27/17

Resources
Easy RC: Engines
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info