Losi Mini 8ight DB: 1/14 4WD Buggy RTR White

Tower Stock# LOSD01WW  •  Manufacturer Stock# LOSD01**
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Color Availability
Notes from our tech department:


Chassis: 0.098 (2.5mm) thick aluminum with plastic roll cage
Drive: Four wheel
Differential: Gear
Radio: 2.4GHz 2-channel Spektrum STX2 transmitter and receiver with
adjustable steering and throttle rate and three position throttle
rate, mini steering servo, four AA batteries
Electronic Speed Control: Mini 25A waterproof, 3S capable
Brushless Motor: Dynamite 3800Kv, 380 size long can inrunner
Battery: 7.2V 1200mAh NiMH flat configuration with EC3 connector
Battery Charger: Dynamite 100mA AC wall type with EC3 connector
Suspension: Independent
Shocks: Oil-filled aluminum body coil over
Tires: All-terrain buggy, soft compound, 2.9 (73.7mm) diameter
Wheels: 1.62.0 (40.650.8mm), off-road multi spoke 12mm hex
Ball Bearings: Complete set
Body: Pretrimmed and finished panels with driver and co-driver
Caster: Adjustable, castertoe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.


RTR 114 scale Mini 8IGHT-DB 4WD Brushless Powered Buggy from Losi
with painted Body with Cockpit, 2-ch Radio, 25A ESC, 3800Kv Motor,
7.2V NiMH Battery, AC Wall Charger, four AA Batteries, 4-way
Wrench, Turnbuckle Wrench, 1.5mm & 2.0mm Hex Wrench,
and Instruction Manual


Soft bristle brush for cleaning
0 or 1 phillips screwdriver
1.5mm, and 2.0mm hex driver
Track equipment


Length: 13.2 (335mm)
Width: 8.2 (208mm)
Height: 4.6 (118mm)
Weight: 2.5lbs (1.1kg)
Ground Clearance: 1.1 (28mm)
Wheelbase: 8.8 (223mm)
Gear Pitch: 48
Front and Rear Track: 8.12 (206mm) distance from outer edges of
wheels measured side-to-side
Internal Gear Ratio: 2.47:1
Spur Gear: 60T
Pinion Gear: 14T


Available in the following body colors:
Blue, LOSD01BB
White, LOSD01WW
For the replacement Ball Bearing Set order LOS217000, LOSC1041

jxs 51818