E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (

Tower Stock# EFLM1001  •  Manufacturer Stock# EFLA1060B
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 2 Payments ($42.50, $42.49) Details
Notes from our tech department:
**If this ESC will be replacing the ESC used in the**
**E-flite Carbon-Z Cessna 150 (EFL1450EFL1475) or the**
**E-flite Carbon-Z Cub SS (EFL12450EFL12475)**
**the DYNP1080 EC5 Device to EC3 Battery Adapter must be purchased.**


Up to 60 amps continuous current with proper air flow, and 75 amps
burst current (15 seconds)
5A continuous current, 5V switch-mode BEC supports most 3 axis
stabilization systems
Programmable motor braking
Drives up to 7 analog or 6 digital standard-sized servos with the
BEC on any recommended input voltage
Programmable soft start for helis and airplanes
Programmable throttle input range (1.1ms-1.9ms or 1.2ms-1.8ms)
Programmable timing with 5 user-selectable ranges for use with a
variety of brushless motors
Auto motor shut down in the event of lost signal or interference
Radio system onoff power switch
Safe power-arm mode prevents accidental starts
One year limited warranty through Horizon Hobby, Inc beginning at
date of purchase


E-flite V2 60-Amp Pro-Switch Mode BEC Brushless Electronic Speed
Control with EC3 Battery Connector, 3.5mm Motor Connectors and
Instruction Sheet


DYNP1080 EC5 Device to EC3 Battery Adapter if installing in the
E-flite Carbon-Z Cessna 150, or the Carbon-Z Cub SS


Continuous Current: 60A*
Brake: Yes programmable
Cell Compatibility: 3-6S LiPo, or 9-18 NiMHNiCd
Battery Connector: EC3
Input Voltage: 10.8 - 22.2V
Max Burst Current: 15 sec 75A*
Output Connector: 3.5mm bullet
Dimensions, (L, W, H): 2.85 x 1.30 x 0.61 (73 x 33 x 15.5mm)
Weight: 2.65 oz (75 g)
Wire Gauge: 13 AWG
*with proper cooling

jxs 050819



Product Documents & Files

Manufacturer Contact Information