Castle Creations SW4 WP Sensorless ESC 1410-3800 5mm

Tower Stock# CSEC6406  •  Manufacturer Stock# 010-0164-06
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the Castle Creations Sidewinder 4 Sensorless Electronic Speed Control
and the 1410 3800Kv Sensored Brushless Motor with 5mm Shaft.

Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs
using a 2S LiPo, and 1/10 scale buggies and stadium trucks up to
4lbs using a 2-3S LiPo.


Sidewinder 4 ESC;
Recommended for 1/10 scale RC vehicles weighing up to 6.5lbs
Sensorless brushless and/or brushed motor compatibility
Can be powered by a 2-3S LiPo, or 6-8 NiMH battery
5V fixed, 2A BEC (battery eliminator circuitry)
Cryo-drive technology, a combination of software enhancements and
precision fluid dynamics offers reduced operating temperatures in
all applications
Redesigned case for optimum airflow
Compatible with the optional Castle Link USB programmer (not included
order CSEM6300
Large high-rate 30mm cooling fan
Waterproof in normal operation, see COMMENTS below;

1410 3800Kv Sensored Brushless Motor w/5mm Shaft;
High-strength 180C grade neodymium sintered magnets with high-
strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensor eliminates cogging and inconsistency during
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bullet
Four pole configuration for maximum efficiency at high RPM
ROAR standard sensor port and labeled connections
Replaceable front end bell/bearing assembly and rotor/shaft assembly


Sidewinder 4 ESC with two Receiver Wires with Standard Connectors
4mm Bullets for Motor Connection, On/Off Switch, Motor Wires
1410 3800Kv Sensored Brushless Motor, Sensor Wire and Instructions


Battery Plug and Pinion Gear depending on application


Sidewinder 4 ESC
Input Voltage Range: 2S LiPo, 6-8 cell NiMH
Kv: 7700
Max. RPM: 100,000
Max. Recommended Vehicle Weight: 4lbs (1814g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 6.9oz (197g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet
1410 3800Kv Sensored Brushless Motor w/5mm Shaft (CSEC6600);
Input Voltage Range: 2-3S LiPo
Kv: 3800
Max. RPM: 100,000
Length: 2.1" (57mm)
Diameter: 1.4" (36mm)
Weight with Wires: 8.4oz (237g)
Shaft Diameter: 0.197" (5mm)
Shaft Length: 0.83" (21mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet


Not intended for operation while submerged in liquid, fan is splash
resistant but should be removed from the ESC before prolonged
exposure to liquids.

jxs 02/20/18


Manufacturer Contact Information