Brand Logo
4 out of 5 Customer Rating

XeRun XR10 Pro G2 Brushless ESC/V10-4.5T G3 Motor Combo

Item No. HWI38020280
Brand Logo
4 out of 5 Customer Rating

XeRun XR10 Pro G2 Brushless ESC/V10-4.5T G3 Motor Combo

Item No. HWI38020280
$299.99
RC Club points earned on this item shown at checkout.
Select Options
Connector: XT60 Set, 3.5mm
HWI38020280 INTC23352
Connector: XT60 Set, 3.5mm
Next Shipment November 2024
$3.49
High Current Connector: XT-90 Set
HWI38020280 INTC24523
High Current Connector: XT-90 Set
Next Shipment November 2024
$3.99
Connector: IC3 Device and IC3 Battery Set
HWI38020280 SPMXCA301
Connector: IC3 Device and IC3 Battery Set
In Stock
$6.99
Connector: IC5 Device and IC5 Battery Set
HWI38020280 SPMXCA502
Connector: IC5 Device and IC5 Battery Set
In Stock
$10.99
Adapter: IC5 Device / 4mm Male Bullets with 6" Wires: 13 AWG
HWI38020280 SPMXCA504
Adapter: IC5 Device / 4mm Male Bullets with 6" Wires: 13 AWG
In Stock
$11.99
0 Item Selected Items Selected
TrakPower Rosin Core Silver Solder 100g
HWI38020280 DTXR0976
TrakPower Rosin Core Silver Solder 100g
In Stock
$34.99
TrakPower TK60 60W Soldering Iron
HWI38020280 DTXR1000
TrakPower TK60 60W Soldering Iron
In Stock
$16.99
Pro Connector Soldering Jig
HWI38020280 HRASD488P
Pro Connector Soldering Jig
In Stock
$28.88
0 Item Selected Items Selected
Only manufacturer discounts can be applied to this product. Tower Hobbies coupon codes not applicable
In Stock
Selected Store

Product Details

icon-box
In The Box
  • (1) XR10 Pro (G2)
  • (1) XERUN V10 G3 Competition Brushless Motor

ESC Features

  • Upgraded 32-bit M4 microprocessor with more powerful processing capability guarantees stable control and rapid response. (Industry's highest 32-bit microprocessor, increased processing speed by X4)
  • Peak current up to 1200A. (this is not a typo)
  • Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
  • Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving; braking forces (of the motors).
  • Expanded range of the max. brake force brings in the active brake ranges from 101% to 150%.
  • Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency.
  • 10 select-to-use profiles applicable to all 1/10th RC car racing.
  • Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations.
  • Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC.
  • With the New WIFI express module (purchase separately), users are able to program parameters, upgrade firmware and check relevant data during the event using either the iPhone or Android devices.
  • Switchable motor direction (CCW/CW) for various chassis.
  • Multiple protections comes in standard
  • low-voltage cutoff protection
  • ESC and motor thermal protection
  • Fail safe (throttle signal loss protection)
  • Reverse polarity protection*
  • Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time.
  • Firmware upgrade via Hobbywing multifunction LCD program box or WiFi Express (item sold separately).
  • * The external standard cappack will still be damaged if battery reversal occurs. For full protection, recommend to use HOBBYWING SMT-MLCC capacitor banks (purchase separately)

Motor Features

  • Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when compared with the previous generation G2 motors.
  • The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
  • The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
  • The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
  • The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
  • The use of high-performance stator core, heat(200℃)-resistant wire, heat(200℃)-resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
  • It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC

Product Specifications

Application 1/10, 1/12 Scale Modified Class On-Road
Auto Cutoff Yes
BEC Yes
BEC Continous Current 10A
BEC Type Switch mode
BEC Voltage 5.7V-7.4V
Brakes Programmable
Drive Type Forward/Brake/Reverse
Manufacturer # 38020280
Maximum Burst Current 1200A
Maximum Continuous Current 160A
Motor Design Inrunner
Number of Poles 2
Overload Protection Yes
Product Height 1.27" (32 mm)
Product Length 1.47" (37 mm)
Product Weight ESC: 3.35oz (95g), Motor 5.7oz (163g)
Product Width 1.22" (31 mm)
Reverse Yes
Shaft Diameter 0.124" (3 mm)
Shaft Length 0.525" (13 mm)
Turns 4.5
Water-Resistant Yes