Backorder
Brand Logo
5 out of 5 Customer Rating

EZRUN MAX10 G2 Brushless ESC, 80A

Item No. HWI30102604
Backorder
Brand Logo
5 out of 5 Customer Rating

EZRUN MAX10 G2 Brushless ESC, 80A

Item No. HWI30102604
$69.99
RC Club points earned on this item shown at checkout.
Only manufacturer discounts can be applied to this product. Tower Hobbies coupon codes not applicable
Back Order
Selected Store

Product Details

icon-box
In The Box
  • (1) EZRUN MAX10 G2 Brushless ESC

Upgraded Sensor Mode

The EzRun Max10 G2 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of control feel and perfectly matches the EzRun 3652/3665 SD G3 motors.

Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity.

Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more with greater effect.

Effective Heat Dissipation

The addition of the patented frameless fan allows a large flow of air outlet on the side of the fan to blow the heat away from the integrated case.

The smart start-stop technology is introduced to the Max10 G2 ESC. The frameless fan will not be enabled to reduced noise and saving power. The fan will only work when the temperature rises to a certain level.

Large Capacitor Built-In

Compared with the previous generation of the MAX10 ESC, the total capacitance of the capacitor is increased by 74% and is overheating protected. The functions improve the power delivery from the battery to the ESC to avoid it from overloading and causing capacitors to explode.

Smart Freewheeling Technology

Smart freewheeling technology enables the MAX10 G2 to have higher drive efficiency than the previous generation, resulting in lower operating temperatures and a minimum temperature of approximately 25°C lower than the previous generation.

Data Logging

After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.

IP67 Protection

The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.

Product Specifications

Amperage 80A
Product Length 2.08661" (53 mm)
BEC Continous Current 6V
Water-Resistant Yes
BEC Yes
Input Voltage 2-3S Lipo
Product Height 1.464567" (37 mm)
Product Width 1.555118" (39 mm)
Reverse Yes
Maximum Burst Current 520A
Maximum Continuous Current 80A
Motor Type Brushless