Extra 300SX 3D Brushless EP Rx-R 41.5"

For nearly 30 years the full-scale Extra 300 has been mesmerizing audiences at air shows around the world. Flyzone's first truly 3D-capable model pays homage to this legendary performer, combining a powerful brushless motor and ESC with an extremely high power-to-weight ratio. The result? An airplane that excels at everything from solid sport flying and precision aerobatics to impressive vertical performance and heart-pumping high alpha maneuvers. If you're an experienced pilot ready to expand your flight envelope, the Extra 300SX Rx-R is the plane to take you there!

• Construction: AeroCell foam with large double beveled control surfaces
• Wing: One-piece
• Aileron Control: Dual servo
• Motor: 30-35-1000kV brushless outrunner
• Electronic Speed Control: 30A with star connector, 3A BEC
• Servos: Four micro
• Canopy: Molded clear plastic with magnetically attached AeroCell foam hatch, dashboard decal and pilot helmet
• Propeller: 10x4.5 black plastic
• Landing Gear: Prebent wire with 2" (51mm) foam main wheels and .75" (19mm) steerable tailwheel, magnetically attached landing gear covers and wheel pants that pop off during rough landings to avoid damage
• Spinner: 1.25" (44mm) diameter red plastic

• Wingspan: 41.5" (1055mm)
• Wing Area: 297 sq in (19.2 sq dm)
• Weight: 28 - 31 oz (795 - 880 g)
• Wing Loading: 13.6-15.0 oz/sq ft (42-46 g/sq dm)
• Length: 34.5" (875mm)
• Center of Gravity (CG): 2-1/2" - 3-1/4" (64mm - 83mm) back from the leading edge of the wing at the fuselage side
• Control Throws: Low Rate   /   High Rate   /   3D
• Elevator: 3/8" (10mm) 8° 5/8" (16mm) 14° 1-3/4" (44mm) 35°
• Rudder: 1-1/4" (32mm) 20.5° 1-3/4" (44mm) 27.5° 2-1/4" (57mm) 34°
• Aileron: 1/4" (6mm) 7.5° 3/8" (19mm) 11° 3/4" (19mm) 21°