- Two sealed bearings on crankshaft-simple design for lighter weight
- Beam mounting allows easy fit in the same mount as comparable glow engines
- Aluminum alloy crankcase with advanced CNC machining
- Rear mounted pumped carburetor ensures easier installation and smooth idling and dependable fuel flow during flights
- Fully automatic electronic ignition
- Also includes: spark plug, gasket, bolts, throttle arm extension and manual
- Two-year limited warranty through Hobby Services beginning at date of purchase
- 87+ Octane Gasoline
- 2-cycle oil (30:1 ratio)
- 4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
- LiPo & LiFe batteries require voltage regulator on older A-01 ignition modules
- Propeller and field equipment
**NOTE, If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case**
- DLE-20cc Engine
- Spark Plug
- Muffler Gasket
- Two 5x20mm Muffler Bolts
- Product Manual
DLE Electronic ignition
Electronic ignition is the no-hassle answer to simpler starts and higher performance.
Loaded with Extras!
The DLE-20 package includes a muffler, spark plug, gasket, bolts, throttle arm extension & manual.
Glow power isn't the only option anymore. The DLE-20 not only fills the displacement gap, but includes a beam mount to make the glow-to-gasoline upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment.
A generous package of "extras" and electronic ignition for starting ease and top performance make the DLE-20 an attractive alternative to glow...and a solid buy for value and performance.
|Displacement||1.22 cu in (20cc)|
|Engine (Only) Weight||22.93 oz (650g)|
|HP||2.5 hp @ 9,000 RPM|
|Ignition Weight||4.23oz (120g)|
|Muffler Weight||1.76oz (50g)|
|Oil Type & Content||30:1 2-cycle oil mixture|
|Plug Type||NGK CM6|
|Product Height||3.56" (90mm) from center of crankshaft to top of cylinder head|
|Product Length||5.43" (138mm) from carburetor to prop washer|
|Product Width||2.37" (60mm) between center of mounting holes|
|Prop Range||14x10 - 17 x 6|
|Starter Type||Hand Held Starter|
|Total Weight||29.9 oz (820 g)|