Brand Logo
3.8 out of 5 Customer Rating

XeRun V10 G3 8.5T Mod Motor

Item No. HWI30401111
Brand Logo
3.8 out of 5 Customer Rating

XeRun V10 G3 8.5T Mod Motor

Item No. HWI30401111
$99.99
Earn points on this item
Select Options
TrakPower Rosin Core Silver Solder 100g
HWI30401111 DTXR0976
TrakPower Rosin Core Silver Solder 100g
In Stock
$34.99
TrakPower TK60 60W Soldering Iron
HWI30401111 DTXR1000
TrakPower TK60 60W Soldering Iron
In Stock
$16.99
Pro Connector Soldering Jig
HWI30401111 HRASD488P
Pro Connector Soldering Jig
Next Shipment March 2022
$28.88
0 Item Selected Items Selected
Only manufacturer discounts can be applied to this product. Tower Hobbies coupon codes not applicable
In Stock
Selected Store

Product Details

DESIGN matters. It’s a motor specially designed for Extremely High-Level Racing. The RMP of G3 Stock motor is significantly improved, the KV & torque are improved by 16% and 4% respectively, compared with the V10 G2 Stock motor.

Features

  • Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when compared with the previous generation G2 motors.
  • The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
  • The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
  • The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
  • The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
  • The use of high-performance stator core, heat(200℃)-resistant wire, heat(200℃)-resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
  • It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC

Product Specifications

Adjustable Timing Yes
Application 1/10th Drift, 2WD Off-road Racing
Bushing Or Bearing Bearing
Input Voltage 2S
Maximum Burst Current 84A, 298W
Motor Design Inrunner
Motor Type Brushless - Sensored
Number of Poles 2
Outer Diameter 1.4" (36 mm)
Product Length 2.01" (51 mm)
Product Weight 5.74oz (163g)
Recommended Speed Control Hobbywing XR10 PRO or XR10 Stock SPEC (1S & 2S)
Resistance 0.097ohms
Shaft Diameter 0.125" (3 mm)
Shaft Length 0.52" (13 mm)
Turns 8.5