HPI Racing 1/10 E-Firestorm 10T Flux BL 2.4GHz RTR

Tower Stock# LXDUTV  •  Manufacturer Stock# 105879
HPI Racing 1/10 E-Firestorm 10T Flux BL 2.4GHz RTR (large view)
Notes from our tech department:
This is the 1/10 scale 2.4GHz radio controlled, electric powered, ready-to-run
HPI E-Firestorm 10T Flux Stadium Truck.
Many HPI Firestorm 10 option parts fit this vehicle.


Chassis: Composite nylon tub 3mm (0.12") thick
Drive: Rear wheel with steel dogbones and axles
Motor: HPI Flux Vektor 4800kV brushless with Neodymium magnet,
oversized sealed ball bearings, four pole rotor for more torque
and triple insulated windings for long life
Electronic Speed Control: HPI Flux Vapor, waterproof, handles 3S LiPo
battery, Linear Torque Braking for better control on corner entry
sensorless tecnology and cross cut aluminum heat sink
Radio: 2.4GHz with high-torque steering servo, failsafe and
waterproof receiver box
Wheels: Chrome finish Split 5 2.0" (51mm) wide, 2.2" (55mm)
diameter with 12mm aluminum hex adapters compatible with all HPI
1/10 scale vehicles
Front Tires: Front Line 4" (102mm) diameter, 2.1" (53mm) wide
Rear Tires: Ground Assault 4" (102mm) diameter, 2.1" (53mm) wide
Transmission: Low profile 2.6:1 ratio with all metal gears and dual
pad slipper clutch
Shocks: Four silicone oil-filled composite body
Suspension: Assembled with captured hinge pins, geometry and
components from Firestorm 10
Differential: Sealed planetary type
Spur Gear: 87 tooth 48 pitch
Pinion Gear: 19 tooth 48 pitch
Body: Pre-painted and trimmed DSX-2
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
with dual pad slipper clutch
Steering: Bell crank with cam-type servo saver steering arms
laydown steering servo position
Steering servo: SF-10W Servo, waterproof/4.5kg-cm6.0V (HPIM4105)
Warranty Period: Two year limited, beginning at date of purchase


HPI Firestorm 10T Flux Stadium Truck, brushless motor, ESC,
2.4GHz radio with steering servo, Front Line front tires,
Ground Assault rear tires, DSX-2 painted body, instruction manual,
four AA cells


Batteries: 2 or 3S LiPo, or 6-7 cell NiMH with Dean's connector
Battery Charger: To match selected battery
Maintenance and track equipment


Length: 16.7" (425mm)
Width: 12.8" (325mm)
Height: 5.8" (147mm) at rear wing
Wheelbase: 11.4" (289mm) adjustable
Length: 16" (406mm)
Width: 6.5" (166mm) ahead of rear wheels (widest point)
(141mm) ahead of front wheels (narrowest point)
Height: 3.8" (96mm)
Thickness: 0.020" (0.5mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Transmission 1 DTXC1595
4 5x10mm Transmission 2 DTXC1535
2 5x10mm Front Hubs 1 DTXC1535
2 5x10mm Rear Hubs 1 DTXC1535

jxs 12/11/13
updt jxs 02/05/14

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info