Phoenix Model Giles 202 .46 GP/EP ARF 53.1"

Tower Stock# LXBGZP  •  Manufacturer Stock# PH014
Phoenix Model Giles 202 .46 GP/EP ARF 53.1
Notes from our tech department:
This is the radio controlled, glow or electric powered, Almost-Ready-to-Fly
Giles G-202 .46 scale Aerobatic Airplane from Phoenix Model.
Recommended for modelers who have had trainer airplane experience.


Construction: Built-up balsa and plywood
Covering: High quality heat shrink covering, color scheme is mostly
White on the fuselage and wings with Red, Yellow, and Blue accents
with Red wheel pants
Wings: Two-piece wood, must be joined before installation
Radio Compartment: Plywood reinforced, easily accessible over wing
Cowling: Painted fiberglass
Canopy: Clear, single
Wheel Pants: Painted fiberglass
Cockpit features: Detailed and painted pilot figure
Landing gear: Pre-bent 3/16" (4mm) aluminum with 2-1/4" (57mm)
treaded rubber main wheels and one 1" (25mm) rubber tail wheel with
pre-bent 0.078" (2mm) thick wire
Aileron Control: Dual servo, standard size and torque required
Hardware: Hinges, wing bolts and all other required fasteners
Motor Mount: Nylon


Prebuilt and pre-covered wings fuselage and tail section aluminum
main landing gear, tailwheel wire, nylon adjustable engine mount,
main and tail wheels, pre-bent pushrods, hardware package,
fiberglass cowling and wheel pants, clear canopy, pilot figure,
decals, photo-illustrated instructions,


For glow operation;
Engine: .46 cu in (7.5 cc) 2-stroke
OR .53 cu in (8.7cc) 4-stroke
Muffler: Standard type included with engine
Servos: Five, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder, 1-throttle)
Propeller: 11x6

For electric operation;
Brushless Motor: Great Planes Rimfire .46 42-60-800, GPMG4725
ESC: 60A
Propeller: 12x8 or 13x6.5
LiPo Battery 4S (14.8V) 30C, at least 4000mAh
Servos: Four, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder)

For glow and electric power;
Radio: 4-channel
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, building
and field equipment
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment


Wingspan: 53.1" (1350mm)
Flying Weight: 6.1lbs (2780g)
Specs such as Wing Area and Wing Loading are not provided by the
Length: 53.9" (1380mm)
Airfoil: Fully-symmetrical, mid wing
Center of Gravity: 4.1" (105mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws-
Ailerons: Up & Down 0.40" (10mm)
Elevator: Up & Down 0.59" (15mm)
Rudder: Right & Left 1.19" (30mm)


If a replacement fuel tank is needed, order the Sullivan 12oz flex
tank (SULQ1741), or the DuBro 12oz tank (DUBQ0212).
Some minor trimming and modifications may be required.

jxs 8/02/11

See Tower Catalog page 31.
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info