ST Model Blaze EPO Brushless Hotliner Receiver-Ready

Tower Stock# LXACFW  •  Manufacturer Stock# SNNA1057
  • front/side (see larger view)
  • out of package (see larger view)
Notes from our tech department:
This is the radio controlled, brushless electric powered, Rx-Ready
Blaze 62" Scale Sailplane from ST Model.
Includes Motor, ESC and Servos installed.


Construction: EPO foam, self aligning snap and lock construction
Wings: Two-piece, with carbon wing tube for high strength without a
lot of weight
Aileron Control: Dual servo
Rudder Control: Dual servo
Motor: Brushless
Servos: Micro
Propeller: 10x6 folding type integral with spinnerj
Canopy: Brown tinted
Building Time: Approximately 20 minutes


RxR Blaze 62" Scale Sailplane with brushless motor, four micro servos
ESC, propeller, canopy, decal sheet and instruction manual


Transmitter: 4-channel with receiver and mixing capabilities
Motor Battery: LiPo 11.1V at least 1800mAh, GPMP0855
Battery Adapter: If using the battery listed above, a Dean's Ultra
Male Connector WSDM1302 must be soldered to the ESC leads to match
the battery connector
Charger: LiPo compatible
Building and field equipment


Length: 40" (1016mm)
Wingspan: 61.5" (1562mm)
Flying Weight: 31.7oz (900g)
Wing Area: 326 sq in (21 sq dm)
Wing Loading: 14 oz/sq ft (43 g/sq dm)
Center of Gravity (CG): 2.5" (63.5mm) from the aft section of the
wing measured at the fuselage
Control Throws:
Aileron Up/Down: 25
Rudder Left/Right: 15
Elevator Up/Down: 15

jxs 07/07/10
updt jxs 09/05/12

Know Before You Fly
Easy RC: Sailplanes
Industry Review #1
Industry Review #2
Manufacturer Mailing Address
Additional Manufacturer Contact Info