Phoenix Model Funstar 3D Mk2 .46-.55 GP/EP ARF 58.8"

Tower Stock# PMMA1358  •  Manufacturer Stock# PH119
  • front/side (see larger view)
  • rear/side (see larger view)
Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly 1.6 scale Funstar Mk2 3D Airplane from Phoenix Models.
For Pilots with Intermediate Level of Experience.


Construction: Lightweight laser cut wood
Wing: One-piece
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Factory painted hand laid fiberglass
Spinner: Red plastic, 2.3" (58mm) diameter
Canopy: Clear molded plastic with painted pilot figure
Landing Gear: Prebent aluminum with 2.5" (63.5mm) main wheels, 1"
(25.4mm) rubber tailwheel
Fuel Tank: Approximately 10oz (300cc)
Wheel Pants: Factory painted hand laid fiberglass
Engine Mount: Two-piece composite
Motor Mount: Plywood
Building Time: Ready to fly in several hours


ARF Funstar Mk2 3D Airplane with Spinner, Pilot Figure. Landing Gear
Fuel Tank, and Instruction Manual


Radio: At least 4 channel with 4 mini high torque, one throttle servo
if using glow engine
Receiver Battery: 800-1200mAh NiMH
Glow Power-
Engine: 2-stroke .46-.55 cu in OR 4-stroke .52 cu in
Propeller: to match selected engine
Fuel, glow starter, throttle servo
Electric Power-
Brushless Motor: 1000-1400kV outrunner
ESC: To match selected motor
LiPo Battery: 3-6S
Battery Charger: To match selected battery
Propeller: To match selected motor
Building and field equipment


Wingspan: 58.8" (1495mm)
Length: 55.3" (1405mm)
Weight: 74-81oz (2.1-2.3kg)
Wing Area: 914 sq in (59 sq dm)
Wing Loading: 12.8 oz sq/in (39 g sq/dm)
Center of Gravity (CG): 4.7-4.9" (120-125mm) back from leading edge
of wing measured at the fuselage
Control Throws-
Ailerons (up & down): 0.47" (12mm), 10% expo
Rudder (right & left): 0.98" (25mm), 15% expo
Elevator (up & down): 0.47" (12mm), 12% expo


Replacement main wheels are not available from Phoenix Models. If
wheels are required, order the Great Planes 2.5" Ultralite Wheels,
GPMQ4203. Enlargement of axle hole may be required.
If a replacement fuel tank is required, order the DuBro 10oz tank,
DUBQ0210, some trimming and modification to the fuselage may be

jxs 12/19/14

See Tower Catalog page 31.
Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Industry Review #2
Industry Review #3
Industry Review #4
Industry Review #5
Manufacturer Mailing Address
Additional Manufacturer Contact Info