Duratrax G-27CS Racing Engine Super Start Ready

Tower Stock# LXRMB8  •  Manufacturer Stock# DTXG0257
Duratrax G-27CS Racing Engine Super Start Ready (large view)
Notes from our tech department:
This is the DuraTrax/SuperTigre G-27CS Super Start Ready Racing Engine
for the DuraTrax Warhead Evo and the Raze Buggy and Truggy.


Pre-installed back plate and nut for DuraTrax Super Start operation
ABC cylinder construction-"A"luminum piston,"B"rass cylinder liner
that is "C"hrome plated
Dual ball bearing-supported SG (pilot) style crankshaft
Dual needle Slide Valve Carburetor
Machined aluminum blue cylinder head
Rear exhaust
Three year limited warranty


DuraTrax/SuperTigre G-27CS Super Start Ready Racing Engine with glow


Car blend fuel, glow starter, fuel tubing and track equipment
**If using with the Warhead Evo, the following items are required;**
Duratrax Super Start
Pull Start (DTXG0756)
Super Start Backplate
Fuel: Car fuel blend with 20% nitromethane content
Glow starter, plug wrench and track equipment


Displacement: .27 cu in (4.4cc)
Bore: .72 in (18.2mm)
Stroke: .67 in (17mm)
Horsepower: 2.5 hp at 30,000 RPM
Practical RPM Range: 3,000-35,000
Weight: 14.1oz (400g)

Distance Between Mounting Holes Same Side: .83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Height from Bottom of Mounting Tabs/Top of Cylinder Head: 3.6" (92mm)
Height from Bottom of Crankcase to Top of Cylinder Head: 4.2" (107mm)
Width at Mounting Tabs: 1.8" (46mm)
Distance from Pull Start to Front Bearing: 3.3" (84.5mm)
Distance from Pull Start to End of Crankshaft: 3.9" (99mm)
Diameter of Exhaust Opening: .59" (15mm)
Diameter of Carburetor Opening: .56" (14.2mm)

Factory Needle Settings:
High Speed Needle: 4.5 turns OUT from closed
Low Speed Needle: 12.5 turns OUT from closed
(1 turn OUT from flush with ball link body)


This engine is intended for use in the DuraTrax Warhead EVO and the
Raze Truggy and and Buggy and does not include an instruction
Refer to engine installation and maintenance sections in each

jxs 6/19/07
updt lmm 3/26/09

Parts Compatibility
Easy RC: Engines
Manufacturer Mailing Address
Additional Manufacturer Contact Info