Tekin 1/8 Rx8gen3 BL ESC 4038 T8gen3 BL Motor

Tower Stock# LXJMLS  •  Manufacturer Stock# TEKTT2339
Easy Pay
Request 2 Payments ($160.00, $159.99) Details
Notes from our tech department:
This is the Tekin RX8 Gen 3 Dual Drive Mode Brushless Electronic Speed Control
and T8 GEN3 1350Kv Brushless Motor.
This Set is Ideal for 1/8 scale Buggies.

FEATURES

ESC:
Ideal for 1/8 scale four wheel drive buggies, truggies, monster
trucks, touring cars, GT and dirt ovals, and 1/10 scale 4WD short
course trucks and rock crawlers
D2: Dual Drive Mode Technology-compatible with sensored and
sensorless motors
Sensor plug for precise commutation with all motors
QuickTune programming and one-touch radio calibration
Programmable High Voltage BEC (6.0v / 7.4v @ 8amps)
New adjustable throttle and brake frequencies, and adjustable torque
control
Datalogging capability, Hotwire 2.0 Interface TEKM1451, and
adapter, TEKM3825 required
EZ Access HotWire Programming Port
On-board temperature indicator
HD gold-plated solder posts for easy soldering
DGF2: Digital Glitch Filtering V2
180 limited warranty through Tekin beginning at date of purchase
Motor:
4 Pole 12 slot high torque design
1/8 scale buggy chassis specific
ROAR legal
CNC machined 6061-T6 billet Aluminum ribbed heat sink can
Neodymium sintered magnets
Rebuildable
Dual-plug sensor wire harness for all sensored and sensorless systems
High RPM ABEC-5 precision bearings
High purity copper windings
Anodized end-bell plates for resistance to corrosion and wear
Low resistance, high power solder tabs

INCLUDES

RX8 Gen 3 Dual Drive Mode Brushless ESC
Gen3 1350Kv Brushless Motor

SPECIFICATIONS

ESC:
Controls: Fwd/Brk or Fwd/Brk/Rev
Input: 2-6S LiPo (7.4-22.2V)
Motor Limits: Brushless-varies by voltage
Brushed Fwd Mode, Brushed Fwd/Rev Mode-No Limit
Max Current: 300 amps per phase
Burst Current: 1000 amps per phase
Timing Profiles: 7 choices (on board)
Modes: FWD Only / FWD-REV / FWD-REV Delay
Programmable BEC: 6.0v / 7.4v @ 8amps
Dimensions: 1.5 x 2.2 x 1.4" (38 x 55.8 x 35.5mm)
Weight: 2.7oz (76.5g)
Motor:
Voltage Limit: 22.2V, 6S LiPo
Weight: 11oz (311g)
Shaft Dimensions: .196 (5mm) x 0.75" (19mm)
Motor Diameter: 1.57" (40mm)
Motor Diameter Including Fins: 1.65" (42mm)
Motor Length: 2.71" (69mm)
Bearing Dimensions: Front: 5 x 16 x 5mm
Rear: 5 x 11 x 5mm
Rotor Size: 18.5mm

jxs 03/28/19

Resources

Manufacturer Contact Information