TrakPower LiPo 2S 7.4V 6000mAh 90C Hard Case Saddle

Tower Stock# LXHLGD  •  Manufacturer Stock# TKPC0624
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the TrakPower 2S 7.4V 90C 6000mAh Saddle Pack LiPo Battery.


Ideal for 1/10 scale off-road applications
ROAR approved


2S 7.4V 90C 6000mAh Saddle Pack LiPo Battery
One set of 4mm male bullet connectors
One Jumper Wire with 2mm Female Bullet Balance Connector
Instruction Sheet


Balancer and LiPo compatible charger, or LiPo charger with built-in
balancer such as the TrakPower VR-1 Dual Racing Charger


Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V (each module is 3.7V)
Capacity: 6000mAh
Max Recommended Charge Current: 1C (6.0A)
Continuous Discharge: 90C (540amps)
Pack Dimensions: 1.8 x 0.98 x 2.7" (47 x 25.1 x 69.5mm)
Weight: 9.9oz (280g)
Watt Hours: 45Wh
Discharge Connector: 4mm Bullet Connector


ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 12/31/13


Manufacturer Product Web Page

Manufacturer Contact Information