Losi 8IGHT-T Nitro RTR: 1/8 4WD Truggy

Tower Stock# LXHCZH  •  Manufacturer Stock# LOS04011
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments of $133.33 Details
Notes from our tech department:


Chassis: 0.16" (4mm) thick 6061-T6 aluminum
Drive: Four wheel shaft drive with center and rear dogbones that
eliminate the friction of a CV coupler and improve bump handling in
Transmission: Sealed metal gear
Differentials: Sealed viscous filled gear diff
Radio: 2-channel Spektrum DX2E DSMR, 3-channel receiver
Servos: Spektrum SPMS605 9KG, waterproof, 161 oz-in torque @ 6.0V
Radio Tray: Gen III with ball bearing linkages, and more accurate
linkage adjustment for longer servo life
Receiver Battery: Dynamite 1600mAh 6V NiMH, 3+2 hump configuration
with universal connector
Engine: Dynamite .28 cu in (4.6cc) glow engine with pull starter
Exhaust Pipe: Tuned pipe, black in color
Brake: Dual disc with steel pads
Suspension: Preset geometry to match settings used by professional
team drivers, four wheel independent
Steering: Fixed length arms
Shocks: 15mm Big Bore composite plastic body, oil-filled
Body: Molded polycarbonate with painted and screened details
Tires: XTT tread
Wheels: Racing dish type
Ball Bearings: Full ball bearing drivetrain
Approximate Assembly Time: No assembly required
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


Losi RTR 1/8 scale 8IGHT Glow Powered 4WD Truggy, 2-ch Radio,
6V NiMH Receiver Pack trimmed Body, Instruction Manual, .21 Engine
with Pull Starter, two waterproof Servos, 4-way Wrench


Glow Fuel: Car blend with 20-30% nitro content
Battery Charger: For NiMH receiver battery
Glow Igniter, Fuel Bottle and Track Equipment


Length: 19.6" (497mm)
Width: 16.38 (416.1mm)
Height: 7.1" (180mm)
Weight: 7.8lbs (3.5kg)
Ground Clearance: 2.4" (60mm)
Wheelbase: 14.93 - 15.09" (379 - 383mm)
Fuel Tank Capacity: 4.2oz (125cc)
Final Drive Ratio: 15.03:1
Internal Gear Ratio: 3.91:1
Pinion Gear: 13T
Spur Gear: 50T
Gear Pitch: 1.0 module
Carburetor Settings;
Low Speed Needle: Close by turning clockwise until it stops, then
turn counterclockwise two turns (42 hours) from the bottom (open)
High Speed Needle: Close by turning clockwise until it stops, then
turn counterclockwise (39 hours) from the bottom (open)
Idle Needle: Turn clockwise to increase idle, counterclockwise to
increase idle
When making adjustments turn needles only 1/12 turn at a time.
Refer to instruction manual for full break-in instructions.


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x10x3mm Steering 2 DTXC1561
2 8X14X4mm flanged Fr Diff not carried
2 8X14X4mm flanged Rear Diff not carried
2 1/2x3/4" Fr Wheels
2 8x16mm Fr Wheels 1 DTXC1585
2 12x18x4mm Rear Wheels 1 DTXC1597
2 8x16mm Fr Wheels 1 DTXC1585
2 5x11x4mm Fr Outdrive Couplers 1 DTXC1547
2 5x11x4mm Rear Outdrive Couplers 1 DTXC1547
Clutch bearing size not listed in manual

jxs 05/21/18