Venom LiPo 3S 11.1V 2200mAh 20C Uni 2.0 DJI Phantom

Tower Stock# VNRE5096  •  Manufacturer Stock# 15096
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the Venom 3S 11.1V 2200mAh 20C LiPo Battery with XT60 Plug.

FEATURES

Fits many 3D helis, EDF gliders, 50" class e-performance, and 3D
e-performance airplanes
XT60 plug for seamless use with the DJI Phantom RC Quad Drone

INCLUDES

3S 11.1V 2200mAh 20C LiPo Battery with XT60 Plug, 12AWG Leads, and
Balance Plug

REQUIREMENTS

LiPo charging bag
LiPo compatible charger

SPECIFICATIONS

Dimensions: 4.17 x 1.41 x 0.98" (106 x 36 x 25mm)
Weight: 6.2 oz (175.8 g)
Max Charge Rate: 3C (6.6A)
C Rate: 20C
Continuous Discharge: 20C (44A)
Minimum Discharge Volts Per Pack: 9V
Max Burst Rate: 30C (66A)
Max Volts Per Cell: 4.2V
Max Volts Per Pack: 12.6V
Watt Hours: 24.42
Lithium ELC in Grams: 1.98

COMMENTS

ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

jxs 01/22/14
ir/jxs

Resources

Manufacturer Contact Information