Top Flite Giant Zero A6M Ready to Cover 50-60cc 86"

Tower Stock# TOPA0752  •  Manufacturer Stock# TOPA0752
Notes from our tech department:
This is the Radio Controlled, Gasoline Powered, RTC (Ready to Cover)
Giant Scale Gold Edition Zero A6M from Top Flite.
Pilot figure shown in photos is not included.
IMAA Legal

**The pictures above show the covered version of the aircraft.**
In this RTR version cowling is unpainted and control surfaces are not prehinged

FEATURES

Construction: Balsa and plywood, built-up and sheeted airframe
components, prehinged control surfaces
Wings: Balsa and ply
Cowl: Fiberglass with hidden mounting screws and replica radial
engine with pushrod tubes and spark plug wires
Cockpit: Detailed instrument panel with recessed gauges
Tail Cone: Molded fiberglass
Spinner: Two-blade aluminum spinner
Warranty: Top Flite Models guarantees this ARF to be free of defects
in material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

INCLUDES

ARF Giant Scale Gold Edition Zero, Decals, 24 oz Fuel Tank, Spinner,
Radial Engine Detail, Cowl, Wheels, Cockpit Interior, and
Instruction Manual

REQUIREMENTS

Radio: 7-channel minimum (8 channel or greater recommended)
Servos: 8-12 servos at least 85 oz-in of torque
20" (508mm) Heavy Duty Servo Extensions: 2 for ailerons, 1 for
optional drop tank
16" (406mm) Heavy Duty Servo Extensions: 6, two for flaps, one
each for throttle, choke, ignition switch and air valve
8" (203mm) Pro Series Heavy Duty Servo Extensions: 3
Heavy Duty Switch Harnesses: Two
Charge Receptacles: Two
Receiver Battery: 3200mAh 4.8V NiCD
Engine: 3.0-3.6 cu in 50-60cc gasoline
Retracts: Robart Pneumatic or electric
Covering, Sealing Iron, Heat Gun
Building and field equipment

SPECIFICATIONS

Wingspan: 86" (2185mm)
Wing Area: 1276 inē (82.3 dmē)
Weight: 25.5-27.5 lb (11.5-12.4 kg)
Wing Loading: 46-50 oz/ftē (140-153 g/dmē)
Length: 70.5" (1790mm)
CG (Center of Gravity): 6.25" (158mm) back from the leading edge of
the wing measured at the fuselage
Control Throws: Low Rate High Rate
Elevator up/down: 5/8" (16mm) 12° 7/8" (22mm) 16°
Rudder right/left: 1-1/2" (38mm) 17° 2" (51mm) 24°
Ailerons up/down: 5/8" (16mm) 10° 7/8" (22mm) 14°
Flaps; half rate 1-3/4" (44m) 24° full rate 2-1/2" (64mm) 36°

COMMENTS

**The replacement parts listed for this airplane are covered in
Top Flite MonoKote**

If a replacement fuel tank is needed, the DuBro 24oz DUBQ0224 and
the Gasoline Conversion Stopper DUBQ0675 can be used.
Some modification to the fuselage may be required when installing
any aftermarket fuel tank.

jxs 01/10/19
ir/jxs

Resources

References

Manufacturer Contact Information