Top Flite 1/5 Giant P-51D Mustang Ready to Cover 84.5"

Tower Stock# TOPA0750  •  Manufacturer Stock# TOPA0750
Top Flite 1/5 Giant P-51D Mustang Ready to Cover 84.5
Notes from our tech department:
This is the Radio Controlled, Glow or Gasoline Powered,
Top Flite RTC (Ready to Cover) P-51D Mustang 1/5 scale Sport Model Airplane.
For Intermediate to Advanced Modeler/Fliers.
84.5" IMAA legal wingspan

**The pictures above show the covered version of the aircraft.**
In this RTR version cowling is unpainted and control surfaces are not prehinged


Construction: Fully sheeted balsa and plywood
Wing: One-piece, built up wood frame which is then sheeted with wood
Radio Compartment: Easily accessible, plywood reinforced
Cowling: Fiberglass
Canopy: Clear, single
Landing Gear: Fixed heavy duty wire ("), but is also set up to use
optional Robart retracts with functional landing gear doors
Dual Wing Servos: Two servos per wing half (1 Flap, 1 Aileron)
Spinner: 5" (127mm) Aluminum
Cockpit Kit: ABS plastic with decals
Building Time: Ready to fly in only 25-30 hours.
Warranty: Top Flite Models guarantees this kit free of defects
in material and workmanship at the date of purchase.
Warranty does not cover any component parts damaged by use or


Pre-built wing, fuselage and tail assemblies, pushrods,
pre-bent " (6mm) fixed main landing gear, 5" (127mm) main wheels
2" (51mm) tailwheel, adjustable engine mount, 32oz (960cc) fuel
tank with glow stopper (for gas use DUBQ0675,not included),
5" (127mm) spinner, wood servo trays and wing joiner,
extensive hardware package and photo-illustrated instructions
also includes full set of colored decals


Engine: 2.1 -2.8 cu in (34.5 - 46cc) 2-stroke
OR 2.5 -4.3 cu in (41-70 cc) spark ignition gasoline engine
Muffler: Pitts style
Radio: 5 - 7 channel
Servos: 10-11 Standard (2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder,
2-Flaps, 1-Tail Steering, 1-Air Control Valve)
(a high torque servo is suggested for the rudder, but not required)
Servo Extensions: (2) 24" Extension, (1) Dual Servo Extension
(4) 6" Extensions
Y-Harness: (1) Y-harness for flaps
Covering, Sealing Iron, Heat Gun
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.


Wingspan: 84.5" (2146mm)
Wing Area: 1245 sq in (80.3 sq dm)
Weight: 19 - 24 lbs (8.61 - 10.88kg)
Wing Loading: 32 - 35 oz/sq ft (98 - 107 g/sq dm)
Length: 73.5" (1865mm)
Airfoil: Fully-symmetrical, low-wing
Center of Gravity: 4-9/16" (116mm) Back from the wing's leading edge
Control Throws: High Rate Low Rate
Elevator: Up & Down 9/16" (14mm) 3/8" (10mm)
Rudder: Right to Left 1" (38mm) 1" (25mm)
Ailerons: Up & Down " (19mm)up " (13mm)up
5/8" (16mm)down 3/8" (10mm)down
Flaps: 1-3/16" (30mm) 2-1/8" (55mm)


**The replacement parts listed for this airplane are covered in
Top Flite MonoKote**

Pilot shown inside the plane is not included.

If retractable landing gear is desired, the following items will be
ROBQ1635-#622-5 Landing Gear ROBQ2305-#157VRX Air Control Kit
ROBQ2225-#160LWC Tail Gear Assembly ROBQ2369-#169 Tubing
2x DUBQ0847-#500TL Wheel
DUBQ0860-1" (45mm) Tailwheel
Electric retracts are also available from Robart, ROBQ1634.

jxs 01/10/19



Manufacturer Contact Information