Team Losi Racing 1/8 8IGHT-X Race 4WD Nitro Buggy Kit

Tower Stock# TLRC1965  •  Manufacturer Stock# TLR04007
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $123.33 Details
Notes from our tech department:


Chassis: 7075 T-6 aluminum 0.12 (3mm) thick wide style that
increases stability, and allows components to be spread out for
easier maintenance, redesigned side guards
Drive: Four wheel shaft drive with equalized driveshaft angle for a
greater 4WD feel, oversized front and rear pinion bearing
Differentials: Gear type, sealed viscous filled, redesigned for
easier access
Engine Mount: Larger in size to reduce chassis flex
Shocks: Oil-filled aluminum body, aluminum caps with threaded bleeder
screws, 4mm diameter shafts
Shock Towers: 7075 aluminum construction with updated camber link
and shock location holes for more tuning options, taller rear tower
Suspension: Improved geometry with updates such as aluminum spindles,
17.5 degree spindle carriers, longer front shocks, wider front
pivot with less scrub radius, narrower rear pivot, longer rear
shocks, and updated hub offset, suspension arms designed to accept
stiffener plates which allow the tuning of the flex of the
suspension arm
Swaybars: Redesigned for more consistent feel, each side has
adjustable length links and collars to keep swaybars centered
Steering: Redesigned for less cluttered linkage and more ackerman
adjustments, improved servo saver eliminates bellcrank bind
during high loads
Ball Bearing Actuators: Revised throttle actuator uses bearings to
improve throttle and brake response, new brace prevents flexing
during heavy braking
Body: Clear polycarbonate, cab forward design to improve steering
Fuel Tank: 4.2oz (125cc)
Wheels: Dish type yellow in color, 3.3 (83.5mm) diameter, 1.7
(42mm) wide,
Brake: Semi-metallic pad with steel disc
Caster: Adjustable, castertoe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, 17.5 caster blocks with adjustable spindle height,
optional spindle Ackerman arms sold separately for fine tuning
Camber: Adjustable front and rear, camber refers to the angle of
the tops of the tires from vertical when viewed from front or
behind vehicle
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.


TLR 18 scale Radio Controlled, Glow Powered 8ight-X Race Buggy Kit
with 13T Pinion Gear, Clear Body, Shocks, Wheels, Fuel Tank and
User Manual


Radio: At least 2-channel with high torque steering servo
Engine: .21-.31 short course type with exhaust system
Receiver Battery: 7.4V LiPo, at least 2000mAh recommended
Paint: Polycarbonate safe spray or brush on paint
Glow Fuel: 10-30 nitro content
Glow Starter, Fuel Bottle, Tools and Track Equipment


Length: 19.6 (497mm)
Width: 12.1 (308mm)
Height: 7.1 (180mm)
Wheelbase: 12.8 - 13 (326 - 329mm)
Ground Clearance: 2.4 (60mm)
Final Drive Ratio: 11.9:1
F & R Track: 12.1 (307mm) distance between outer edges of wheels
measured side-to-side
Wheelbase: 12.7 - 12.9 (323 - 327mm)
Gear Pitch: 1.0 Module


For Replacement Ball Bearings use:
Qty. Size Location Order Qty. Bearing Set
2 8x14mm flanged Rear Diff 1 LOSC1968
2 8x14mm flanged Center Diff 1 LOSC1968
2 8x14mm flanged Front Diff 1 LOSC1968
1 5x11mm Fr Gearbox 1 LOSC1967
1 5x13mm Fr Gearbox 1 LOSC1972
4 8x16mm Front Spindles 2 LOSC1962
4 8x16mm Rear Spindles 2 LOSC1962
1 5x11mm F Diff Pinion Gear 1 LOSC1967
1 5x13mm R Diff Pinion Gear 1 LOSC1972
4 8x16mm Rear Hubs 2 LOSC1962
2 332x316 Throttle Brake Lever TLRC1349
2 size not given Clutch Bell LOSC1969

jxs 112718



Product Documents & Files

Manufacturer Contact Information