TrakPower Balancing Lead Banana To 4mm Bullet Adapter 2

Tower Stock# TKPP5618  •  Manufacturer Stock# TKPP5618
TrakPower Balancing Lead Banana To 4mm Bullet Adapter 2 (large view)
Notes from our tech department:
This is the TrakPower 2S Balance Lead to 4mm Bullet Adapter.

FEATURES

For use with the TrakPower VR-1 Charger
Balances a 2S LiPo battery with 4mm female charge plugs and 2mm
female balance port

INCLUDES

TrakPower 2S Balance Lead to 4mm Bullet Adapter

SPECIFICATIONS

Balance Lead Length: 7.8" (200mm) not including connectors
Charge Lead Length: 7.8" (200mm) not including connectors
Charge Lead Wire Size: 14 AWG

COMMENTS

When installing the LiPo balance adapter, always start with pin #1 as
noted on the charger's balance port. The #1 pin will always be on
the farthest right of the charger's balance port. Connect the
adapter's banana leads to the charger's output. Always match
polarities red to red (+) and black to black (-).
NOTE: For 2S and 4S balance adapters, not all pins on the charger's
balance port will be used. This is normal.

jxs 11/02/12
ir/jxs

Resources

Manufacturer Contact Information