Tamiya 1/10 Hotshot 4WD Buggy Kit

Tower Stock# TAMC0401  •  Manufacturer Stock# 58391
Shipping Restricted ItemDetails
Notes from our tech department:
This is the 110 scale electric powered, radio controlled, re-release
of the 1985 Tamiya Hotshot Off-Road Buggy Kit.


Chassis: Monocoque ABS Resin
Drive: Four wheel shaft drive with dogbone type linkage
Motor: Type 540 with aluminum heat sink and connectors
Electronic Speed Control: Tamiya TEU-104BK wreverse
Shocks: Front and rear mono type horizontally mounted
Gearboxes: Sealed
Differentials: Planetary gear
Transmission: Single-speed
Tires: Spike, Front 3 (77mm) diameter, 1.1 (28.5mm) wide
Rear 3 (77mm) diameter, 1.4 (37mm) wide
Wheels: Nylon resin, White in color
Front 1 (25.4mm) wide, 2 (51mm) diameter
Rear 1.3 (33mm) wide, 2 (51mm) diameter
Bumpers: Front plastic
Suspension: Four wheel double wishbone
Camber Tie Rods: Non-adjustable
Steering Tie Rods: Adjustable
Steering: Bell crank type with servo saver


Tamiya Hotshot buggy with two shocks, 540 motor, heat sink
Electronic Speed Control, body, tires, wheels, 13 and 15 tooth
tooth pinion gears, spur gear, instructions and decal sheet


Radio: 2-Channel with 1 Servo for Steering
Radio Batteries: (8) AA size
Battery: 6-cell wstandard connector
Charger: ACDC Timed or Peak for 6-cell battery
Paint: Polycarbonate safe spray or brush-on
Misc. Items: Building and track equipment


Length: 15.3 (390mm)
Width: 9.2 (235mm)
Height: 5.9 (150mm)
Weight: 2.8lbs (1270g) approximately
Gear Ratio: 10.43:1 with 13T pinion gear
8.704:1 with 15T pinion gear
Length: 8.7 (220mm)
Width: 3.7 (95mm) at rear wheels (widest point)
3.1 (80mm) at front wheels (thinnest point)
Height: 2.3 (59mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 5x11mm Rear Gear Assembly 1 DTXC1547
1 5x8mm Rear Gear Assembly 1 DTXC1523

Body pictured on the box is painted Red with decals applied

jxs 52306



Product Documents & Files

Manufacturer Contact Information