Tamiya 1/10 F104 Pro II Formula One F1 Kit w/Body

Tower Stock# TAMC8652  •  Manufacturer Stock# 58652
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the 1/10 scale, electric powered, radio controlled
F104 Pro II On-Road Racing Car kit.

FEATURES

Chassis: PRO specification 0.12" (3.2mm) thick carbon fiber, 0.079"
(2mm) thick carbon fiber upper deck, new lower deck, inline battery
position
Drive: Two wheel direct with carbon drive shaft
Differential: Ball type with aluminum housing
Ball Bearings: Full set
Body: Clear untrimmed polycarbonate with separate rear wing, new
design based on the 2017 F1 car bodywork and wing dimensions
Steering: Isometric steering rods links with longitudinally mounted
steering servo position
Front Suspension: Independent coil spring, camber can be adjusted by
changing upper mount attachment direction
Rear Suspension: T-bar with carbon friction plate and TRF oil-
filled shock
Tires: Semi-pneumatic synthetic rubber with foam inserts, Front
0.94" (24mm) wide, 2.5" (63.5mm) outer diameter,
Rear 1.2" (31mm) wide, 2.5" (63.5mm) outer diameter
Wheels: Black plastic, Front 0.94" (24mm) wide, 1.8" (45mm) diameter
Rear, 1.1" (29mm) wide, 1.8" (45mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable

INCLUDES

Tamiya F104 Pro On-Road Racing Car kit, Tires, Foam Inserts, Wheels,
04 module Spur Gear, Decals, Body, Shock Oil, Instruction Manual,
Oil-Filled Shock and 25 Tooth Pinion Gear

REQUIREMENTS

Radio: 2-channel, small ESC and receiver recommended, standard size
servo (high-speed servo recommended for best steering)
Radio Batteries: AA
Motor: 540 type
Electronic Speed Control: To match selected motor
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Paint, building and track equipment

SPECIFICATIONS

Vehicle-
Length: 17.3" (440mm)
Width: 7.1" (180mm)
Height: 3.5" (88mm)
Wheelbase: 10.6" (270mm)
Tread: Front, 5.9" (150mm), Rear, 5.7" (145mm) measurement at center
of wheels, side-to-side
Body-
Length: 15.1" (384mm)
Width: 5.8" (148mm)
Height: 3" (76mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Rear Shaft 1 DTXC1561
2 8x12mm Ball Diff 1 DTXC1581
1 5x11mm Diff Housing 1 DTXC1547
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535

jxs 12/27/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info