Tamiya 1/10 Nissan Skyline GT-R (R32) Drift Spec Kit

Tower Stock# TAMC8651  •  Manufacturer Stock# 58651
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the 110 scale, electric powered, radio controlled,
Tamiya TT02D Drift Spec Kit with the Nissan Skyline GT-R (R-32) Body.


Chassis: Plastic, bathtub type with skid shaped underside to
minimize contact with the road surface
LED Lights: Tamiya TLU01, two white and two red colored 5mm lights
Drive: Four wheel, shaft driven
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE-02S
Differential: Gear type
Tires: Super Driftech resin 0.94 (24mm) wide
Wheels: Matte finish metal plated, 1.9 diameter (48.2mm), 0.94
(24mm) wide, 12mm hex, +2 offset
Ball Bearings: Shielded
Suspension: Fully independent double wishbone
Shocks: CVA Super Mini oil-filled plastic body
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Steering: Bellcrank type
Body: Clear untrimmed polycarbonate Nissan Skyline GT-R (R32) body
decals and window masks
Bumper: Front, foam


Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires,
Clear Body, 70 tooth Spur Gear, 22 tooth Pinion, ESC, Decals,
Window Masks, LED Light Kit, Instructions and Wheels


Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Charger: To match selected battery
Building and track equipment


Wheelbase: 9.9 or 10.1 (251mm or 257mm) according to rear
suspension arm assembly
Specs such as finished size and weight of vehicle not provided
by manufacturer
Length: 17.6 (447mm)
Width: 6.8 (173mm)
Height: 4 (102mm)


For replacement, Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
4 8x12mm Differential 2 DTXC1581
2 8x12mm Rear Diff Assembly 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535

jxs 112817



Product Documents & Files

Manufacturer Contact Information