Tamiya TA07R Chassis 4WD Kit

Tower Stock# TAMC4433  •  Manufacturer Stock# 84433
Tamiya TA07R Chassis 4WD Kit (large view)
Easy Pay
Request 3 Payments ($171.74, $171.73, $171.73) Details
Notes from our tech department:
This is the Electric Powered, Radio Controlled,
Tamiya On-Road TA07R Chassis Kit.

Includes the Following Hop-Ups;
TRF Big Bore Dampers
Full Ball Bearings
42216 44mm Double Cardan Joint Shaft
42281 TRF418 Stabilizer Set
54704 TA07 Aluminum Steering Arm Set
54705 TA07 Aluminum Steering Bridge
54724 TA07 Aluminum Servo Mount
54690 TA07 Front Direct Coupling Set (37T)
54706 TA07 Aluminum Counter Pulley
54722 TA07 Aluminum Center Pulley (18T)
54725 TA07 Aluminum Motor Mount Posts
53509 Hard Fluorine Coated 0.6 Aluminum 20T Pinion Gear
54720 TA07 Front Carbon Damper Stay
54721 TA07 Carbon Rear Damper Stay
53823 Clamp Type 5mm Thick Aluminum Wheel Hub
53851 46mm Titanium Coated Suspension Shafts
53917 2.6mm Titanium Suspension Shaft - For Reversible Suspension
54568 TRF418 C Parts (Carbon Reinforced Front Uprights)
54580 Carbon Reinforced Hub Carrier (4) for Reversible Suspension Arms
54692 TRF419 E Parts (Rear Uprights)
54740 TA07 D Parts (Suspension Arms, Medium)
54070 TB-03 Aluminum Suspension Mount (1B)
54072 TB-03 Aluminum Suspension Mount (1D)
54172 TA05 Ver.II Separate Suspension Mounts (1A-1XA)
54173 TA05 Ver.II Separate Suspension Mounts (1B-1XB)
53827 Stabilizer Rod Stopper
54648 Fluorine Coated Stabilizer Ball Connector Set


Chassis: Narrow lower deck with upper frame, removable center
section adjusts torsional rigidity
Drive: Four wheel, single belt with three motor position locations
Shocks: TRF Big Bore, oil-filled
Shock Towers: Carbon
Suspension: TA05 Ver.II separate aluminum mounts, front & rear
stabilizers with fluorine coated stabilizer ball connector,
titanium coated shafts
Steering: Aluminum steering arm, bridge set and steering servo mount
Ball Bearings: Full set included
Motor Mount: Three position aluminum construction, aluminum posts
Pinion Gear: 20 tooth 0.6 module hard, fluorine coated
Front Bumper: Foam


TA07R Chassis kit, with Shocks, Front Foam Bumper, Shock Oil,
64T Spur Gear, 20T Pinion Gear


Radio: 2-channel with high-speed steering servo
Motor: 540 type
ESC: To match selected motor
Battery Charger:
Body: Tamiya TA06 or TA07 recommended
Wheels: 24mm with zero offset
Tires: Medium narrow 24mm with inserts
Building & track equipment


Length: 14.5" (370mm)
Width: 7.4" (187mm)
Wheelbase: 10.1" (257mm)


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 3x6mm Rear Arm Attachment 1 DTXC1503
2 4x8mm Spur Gear 1 DTXC1511
2 4x8mm Counter Pulley 1 DTXC1511
2 3x7mm Motor Mount 1 DTXC1506
2 10x15mm Differential 1 DTXC1595
4 5x10mm Rear Uprights 2 DTXC1535
4 5x10mm Front Uprights 2 DTXC1535

jxs 11/28/17



Manufacturer Contact Information