SIG Rascal .049-.07 GP/EP Kit 49"

Tower Stock# SIGA0080  •  Manufacturer Stock# SIGRC80
Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered,
Rascal Airplane Kit from Sig.


Construction: Laser cut balsa and ply
Wheel Pants: Molded plastic
Windshield and Side Windows: Clear plastic (must be trimmed to fit)
Main Landing Gear: Prebent steel wire 0.087" (2.2mm) diameter
Tail Wheel Wire: Prebent steel 0.9mm (0.035") diameter
Firewall: Plywood


All wood to build kit, clear plastic for windshield and side windows,
decal sheet, instrument panel decal, full-size plans, control rods
and instruction manual


Radio: 3-channel
(rudder, elevator, throttle)
For Glow Power;
Engine: .049 - .07
Fuel Tank: Sullivan 2oz slant
Servo: Micro size for throttle
250 - 300mAh receiver battery
Propeller, fuel, fuel tubing
For Electric Power:
Motor: Speed 400 size with gear drive unit
Electronic Speed Control: BEC that handles at least 8 cells
Battery: 7-cell NiMH KR-600AE cells recommended
Battery Charger: Compatible with selected battery
Propeller: Compatible with selected motor

Spinner: 1-1/2"
Building and field equipment
Covering Material: Two 6' rolls


Wingspan: 49" (1245mm)
Wing Area: 324 sq in (20.93 sq dm)
Length: 32.5" (825mm)
Flying Weight: Glow, 18 - 20oz (510 - 567g)
Airfoil: Flat bottom
*Electric, 22 - 24oz (624 - 680g)
*Includes weight of 7-cell 600AE battery pack
Center of Gravity (CG): 2-3/8" (59mm) back from leading edge of wing
measured at the fuselage
Control Throws
Rudder, right/left: 3/8" (9mm)
Elevator, up/down: 1/4" (6mm)


Sig recommends the Maxx #ACC347 Speed 400 Motor and Gearbox, or a
0.49 - .07 glow engine to power this airplane kit, neither of
which are carried by us. Contact Sig for further recommendations.

jxs 12/18/15



Product Documents & Files

Manufacturer Contact Information