SIG 1/4 Clip Wing Cub Kit .60-.90,86"

Tower Stock# SIGA0047  •  Manufacturer Stock# SIGRC47
SIG 1/4 Clip Wing Cub Kit .60-.90,86
Notes from our tech department:
This is the Radio Controlled, Glow Powered,
1/4 scale Clipped Wing Piper Cub Kit from Sig.


Construction: Balsa, ply and spruce
Wing: One-piece
Aileron Control: Single servo, instructions cover dual servo option
(servos not included)
Landing Gear: Formed steel wire
scale leaf spring steerable tailwheel
Cowl: Molded ABS plastic
Elevator and Rudder Pushrods: Fiberglass


All wood to build kit, plastic cowl, scale dummy engine, bungee
covers and air cleaner, 4 sheets of full-size plans, manual and
landing gear


Radio: 4-channel
Servos: Four heavy duty
Receiver Battery: 6V, at least 2000mAh
Engine: 2-Stroke .60 - .90 (10 - 15 cc) OR
4-Stroke .90 - 1.50 (15 - 25 cc)
Muffler: To match selected engine
Engine Mount: To match selected engine
Wheels: Two 4-1/2" main wheels, one 1-1/2" tailwheel
Fuel Tank: 16oz rectangular
Covering of modeler's choice
Propeller, fuel, building and field equipment


Wingspan: 86" (2184mm)
Wing Area: 1300 sq in (83.9sq dm)
Length: 67" (1700mm)
Flying Weight: 14 - 15lbs (6350 - 6804g)
Airfoil: Flat bottom
Center of Gravity (CG): 4.3" (109mm) back from the leading edge of
the wing at the fuselage
Control Throws:
Ailerons 2" (51mm) total
Rudder, right & left: 1-3/4" (44mm)
Elevator, up & down: 1-3/8" (35mm)

jxs 10/29/15



Product Documents & Files

Manufacturer Contact Information