Scratch & Dent Tamiya 1/10 Subaru Impreza Mex '04 TT-01

Tower Stock# S+DZ1000  •  Manufacturer Stock# S+DZ1000
Scratch & Dent Tamiya 1/10 Subaru Impreza Mex '04 TT-01 (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
****This Item Has Box Damage Only, Full Manufacturer Warranty Applies****

This is the radio controlled, electric powered 1/10 scale,
Tamiya #47372 Subaru Impreza Mexico 2004 On-Road Car Kit.

FEATURES

Chassis: TT-01 type E composite chassis, fiberglass reinforced nylon
upper deck
Drive: Four wheel shaft drive
Electronic Speed Control: Tamiya TBLE02 with brake and reverse,
reverse function may be disabled
Motor: 540 motor with pre-attached leads
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction type (not oil-filled), plastic body
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed, with window mask and body trim decals
Tires: Rubber radial tread 0.94" (24mm) wide, 2.5" (63.5mm)
diameter
Wheels: Gold colored plastic 1.9" (47.8mm) diameter, 0.87" (22mm)
wide, 12mm hex
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Steering: Bell-crank type with servo saver

INCLUDES

TT-01 Type E chassis, 540 motor, ESC, Subaru Impreza Mexico body,
tires, wheels, foam bumper, 19 tooth pinion gear, 61 tooth spur
gear, window mask decals, and instruction manual

REQUIREMENTS

Radio: 2-channel with one standard servo
Radio Batteries: AA size for transmitter
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment

SPECIFICATIONS

VEHICLE-
Length: 15.7" (400mm)
Width: 7.2" (183mm)
Height: 5.5" (140mm)
Wheelbase: 10.1" (257mm)
BODY-
Length: 17.4" (442mm)
Width: 7.2" (182mm)
Height: 4.1" (104mm)

COMMENTS

For replacement, or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Front Hubs 1 DTXC1547
2 5x11mm Rear Hubs 1 DTXC1547
2 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Fr Driveshaft Joint 1 DTXC1547
2 5x11mm Rear Driveshaft Joint 1 DTXC1547

jxs 02/16/18
ir/jxs

Resources

References

Manufacturer Contact Information