Robart Main Gear Landing Set 1/4 Scale Cub

Tower Stock# ROBQ0690  •  Manufacturer Stock# 690
Notes from our tech department:
This is the Robart Main Gear Assembly for 1/4 Scale Piper Cub Kits.
This Main Gear Assembly fits on the bottom of the fuselage.


Fits the Hangar 9, Sig and any other 1/4 scale cubs with a fuselage
width of 6-1/2" (165mm), see COMMENTS below
Provides a more realistic scale appearance for your 1/4 scale Cub.
Pre-primed steel may be painted to modeler's preference.
May use existing wheels a with 3/16" axle diameter.


Two upper and two lower braces.
One right and left hand frame.
Two 3/16" axles.
Four clevis pins.
Four mounting brackets.
All mounting hardware.
Instructions and mounting template.


Installing on plywood floor at bottom of fuselage for mounting.


May require specific modifications to fit different brands of 1/4
scale cubs.

JXS 12/11/00
updt jxs 01/29/13


Manufacturer Contact Information