RISE INDORFIN 130 Brushless FPV Race Drone FPV-R 200mW

Tower Stock# RISE0220  •  Manufacturer Stock# RISE0220
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Tech Notices:Notice 1
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Electric Powered,
Rise INDORFIN 130 200mW Brushless FPV-R Race Drone.


Camera: 600 TVL, adjustable to offset the tilt forward of extreme
VTX Transmitter: 5.8GHz 200mW, 40 channel
5.8GHz Receiver: 32 channels
Receiver: Built-in, compatible with the Rise 2000 transmitter,
"bind" button built into Indorfin links the Indorfin and the
J2000 transmitter
Motors: Four 4100Kv, 1104 size
Flight Controller: F3 Flight Controller with Betaflight, an open
source flight software that allows pilot to customize their own
flight program, or just pick up and fly
Frame: Carbon fiber
Canopy: Removable to save weight, allows receiver to be installed on
Battery: 3S, 11.1V 740mAh 20C Onyx LiPo battery with XT30 connector
4-Pin Receiver Extension: Allows the Indorfin to be used with
nearly any other receiver such as Futaba, Tactic, Spektrum and
more, simply plug in your receiver to Indorfin RX port and select
type of receiver in the Betaflight program
Warranty: RISE guarantees this drone to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.


Assembled INDORFIN FPV Race Drone with F3 Flight Controller with
Betaflight, 3S LiPo Battery, extra Props, Instructions, VTX
Transmitter, 4-Pin Receiver Extension


Transmitter such as the RISE 2000 (RISJ2000)
5.8GHz Monitor or Goggles
LiPo compatible battery charger
Four AA batteries for transmitter


Diagonal Size: 5.1" (130mm)
Width: 5.0" (127mm)
Length: 4.3" (108mm)
Height: 1.9" (47mm)
Weight: 3.7oz (106g) without battery
RTF Weight: 5.9oz (169g)
Propellers: 2.75" (70mm) 3 blade propeller diameter

Resolution: 600TVL
Input Voltage: 3.6-5.5V
Working Current: 550mA (5V) max.
Micro Memory Card Port: Compatible with cards up to 32GB
External Video Quality: 640x480p VGA
Internal Video Quality: 1280x720p
30 fps (when recorded from micro memory card)
Video Format: AVI
Photo Resolution: 2 MP


FPV 'First Person View' transmission products with output power
greater than 25mW require a HAM license to operate legally in the
USA. This involves a 35-question multiple-choice test and a small
fee. You can contact an amateur radio club in your area for
information or assistance in obtaining a license. Also see the
Amateur Radio Relay Network web page about obtaining a license.
Customers outside of the USA should understand and follow all
telecommunications or other regulations in your area.
Always follow the AMA Safety Code when operating model aircraft.
Visit the Academy of Model Aeronautics and search for FPV 550, and
read "Document 550 - Utilizing First Person View Systems to learn
about the safe operation of FPV 'First Person View" systems in
model aircraft.

jxs 02/26/18



Product Documents & Files

Manufacturer Contact Information