Redcat Racing Gen8 PACK (Pre-Assembled Chassis Kit)

Tower Stock# RERC1301  •  Manufacturer Stock# RER11386
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($56.67, $56.66, $56.66) Details
Notes from our tech department:

FEATURES

Chassis: 0.06" (1.5mm) thick C-channel frame rails
Drive: Four wheel
Axles: Portal type for more ground clearance and greater gear
reduction, 6mm solid rear axle shafts and CVA front axle, axles
include a CNC machined spool, metal gear cover and metal wheel
hexes
Transmission: MOD 1 gears, sealed pinion and spur gears, adjustable
to fit most motor and driving styles, compatible with 9T to 23T
pinion gears allowing gear ratios of 28.12 to 71.85
Slipper Clutch: Dual design allows simple removal of the two slipper
pads and springs and reassembly to lock the drivetrain
Suspension: 4-link rear, 3-link front with panhard bar
Shocks: Aluminum body adjustable coil-over 3.7" (95mm) long
Steering: Up to 47 degree total steering angle, chassis mounted
servo placement with panhard bar (steering servo not included)
Ball Bearings: 32 rubber sealed
Bumpers: 9mm thick heavy duty mounting posts, winch mounting holes
and receiver hitch

INCLUDES

Redcat Racing Gen 8 P-A-C-K (Pre-Assembled Chassis Kit) Scale Crawler
Chassis

REQUIREMENTS

Radio: Two-channel with high-torque steering servo
Motor: 550 size brushed
ESC: To match selected motor
Battery: 2S hardcase LiPo, or 7.2V NiMH stick pack
Battery Charger: To match selected battery (charging bag if using
LiPo battery)
Wheels and Tires
Body
Building and track equipment

SPECIFICATIONS

Length: 22.5" (571mm) stock, 21.3 - 23.7" (541 - 601mm) adjustable
Wheelbase: 12.7" (324mm) stock, 12.2 - 13.2" (312 - 336mm)
Gear Pitch: MOD 1
Gear Ratio: 28.12 to 71.85, adjustable
Pinion Gear: 17 tooth brass
Wheel Hexes: 12mm

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location
2 5x10x4mm Transmission
1 4x8x3mm Transmission
2 6x12x4mm Fr Transfer Case
2 5x10x4mm Fr Transfer Case
2 6x12x4mm Rear Transfer Case
2 5x10x4mm Rear Transfer Case
2 12x18x4mm Front Axle
1 7x11x3mm Fr Gear Shaft
2 5x10x4mm Portal Axle Spool
1 7x11x3mm Rear Gear Shaft
1 5x10x4mm Fr Diff Input Shaft
2 5x10x4mm Rear Diff Input Shaft

Ball bearings and quantities needed are listed in Optional Parts
and Accessories

Resources

Manufacturer Contact Information