Redcat Racing 1/6 Shredder Brushless 4WD RTR

Tower Stock# RERC1180  •  Manufacturer Stock# RER09487
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Redcat Racing Ready to Run 2.4GHz Radio Controlled,
Brushless Electric Powered 16 scale Shredder Monster Truck in Red.


Chassis: 0.12 (3mm) thick 6061 aluminum
Drive: Four wheel shaft
Differentials: Bevel gear
Motor: 1300Kv Brushless with heat sink
Electronic Speed Control: EZRUN 80A with cooling fan
Radio: RCR-2CENR with steering dual rate, steering and throttle trim
and reverse, HX-15CS steering servo
Shocks: Aluminum capped, oil filled Big Bore
Transmission: Forward and reverse
Body: Trimmed and painted with red and black color scheme, black
plastic rear wing
Tires: All-terrain tires with foam inserts
Wheels: 6-spoke composite plastic, black in color
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind


Assembled 16 scale Shredder Monster Truck, Brushless Motor, ESC,
2.4GHz Radio, 15T Steel Pinion Gear, Painted Body, Rear Wing and
Instruction Manual


LiPo Batteries: Two 7.4V with T-plug connectors
Battery Charger: Compatible with selected battery
LiPo Charging Bag
AA Batteries: Four for transmitter
Building and Track Equipment


Length: 26.4 (670mm)
Width: 17 (430mm)
Height: 9 (230mm)
Wheelbase: 18.9 (480mm)
Ground Clearance: 3 (76mm)
Battery Tray Dimensions: 5.5 x 1.1 (140 x 29mm)
Length: 23.03 (585mm)
Width: 7.2 (183mm)
Height: 5.6 (143mm)


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 6x12x4mm Fr Uprights 1 DTXC1569
2 10x15x4mm Fr Uprights 1 DTXC1595
2 6x12x4mm Rear Uprights 1 DTXC1569
2 10x15x4mm Rear Uprights 1 DTXC1595
2 12x18x4mm Front Diff 1 DTXC1597
2 12x18x4mm Center Diff 1 DTXC1597
2 12x18x4mm Rear Diff 1 DTXC1597

jxs 120717



Product Documents & Files

Manufacturer Contact Information