Redcat Racing 1/10 Lightning STR Nitro Drift Car RTR Rd

Tower Stock# RERC1154  •  Manufacturer Stock# LIGHTNINGSTR-R
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Shipping Restricted ItemDetails
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Redcat Racing Glow Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run Lightning STR On-Road Drift Car with Red Body.


Chassis: 6061 aluminum construction 0.098" (2.5mm) thick, purple in
Drive: Four wheel shaft
Transmission: Two-speed
Radio: RCR-2C 2.4GHz pistol grip with dual rate steering, steering
and throttle trim
Servos: HX3CP steering and throttle servos
Engine: 0.16 cu in (2.67 cc) Vertex engine with rotary carb, foam
air filter, pull starter, fin cooled exhaust manifold
Exhaust: Two piece composite plastic tuned pipe
Fuel Tank: 2.5oz (75cc)
Shocks: Aluminum capped, oil-filled
Brake: Single composite disc
Front Bumper: Foam
Tires: On-road racing tires, 2.5" (65mm) diameter, 1.02 (26mm) wide
Wheels: 5-spoke chrome finish, 1.02 (26mm) wide, 2.5" (65mm)
diameter, 12mm hex
Body: Molded polycarbonate plastic construction, trimmed and painted,
separate rear wing
Caster: Adjustable front and rear, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RTR Lightning STR On-Road Car with painted Body, Radio System,
Engine, Tuned Pipe, Tires, Wheels and Instruction Manual


Fuel: Car blend with 10-30% nitro content, 20% required for break-in
AA Batteries: Twelve, 4 for transmitter, 8 for vehicle
Glow starter, fuel bottle, track and maintenance equipment


Length: 14.1" (360mm)
Width: 7.9" (200mm)
Height: 4.4" (112mm)
Wheelbase: 10.3" (262mm)
Ground Clearance: 0.18" (4.5mm)
Length: 16.1" (408mm)
Width: 7.5" (190mm)
Height: 3.9" (100mm)


For Replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
3 5x10mm Transmission 2 DTXC1535
2 10x15mm Fr Uprights 1 DTXC1595
2 5x10mm Fr Uprights 1 DTXC1535
2 10x15mm Rear Uprights 1 DTXC1595
2 5x10mm Rear Uprights 1 DTXC1535
Size of ball bearings in clutch not specified

jxs 03/20/17



Manufacturer Contact Information