Redcat Racing 1/10 Terremoto-10 V2 Truck BL 4WD RTR Red

Tower Stock# RERC1103  •  Manufacturer Stock# TERREMOTO-10-RE
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Easy Pay
Request 3 Payments ($93.76, $93.74, $93.74) Details
Notes from our tech department:
This is the Brushless Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run Redcat Racing Terremoto-10-V2 Monster Truck with Red Body.


Chassis: Aluminum with lower plastic tray
Drive: Four wheel shaft
Differentials: Bevel gear type
Radio: RCR2C 2-channel with steering and throttle trim and reverse
and dual rate steering
Steering Servo: High torque 208 oz-in (15kg-cm) waterproof, metal
Brushless Motor: 3000Kv with Supertigre connector
Electronic Speed Control: Waterproof 60A
LiPo Battery: 3200mAh with Supertigre connector
Battery Charger: 110V wall type
Shocks: Oil-filled, long travel
Tires: All terrain rubber with foam inserts
Wheels: Black plastic
Body: Trimmed and painted red with silver, white and carbon
fiber look graphics
Caster: Adjustable, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Pinion Gear: 17T metal
Bumpers: Front and rear black plastic


Assembled Terremoto-10-V2 Monster Truck with Brushless Motor, 60A
ESC, 2.4GHz Radio System, Painted Body, LiPo Battery, Charger


LiPo charging bag
Track and maintenance equipment


Length: 19.7" (500mm)
Width: 14.2" (360mm)
Height: 8.3" (210mm)
Wheelbase: 12.4" (316mm)
Ground Clearance: 2.2" (55mm)
Length: 18.5" (470mm)
Width: 6.3" (160mm) at center, thinnest point
7.3" (186mm at rear fender flares, widest point
Height: 5.7" (144mm)


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x12x4mm Rear Uprights 2 DTXC1569
4 6x12x4mm Front Uprights 2 DTXC1569
4 5x10x4mm Gearbox 2 DTXC1535
2 12x18x4mm Front Diff 1 DTXC1597
2 12x18x4mm Rear DIff 1 DTXC1597

jxs 03/27/17



Product Documents & Files

Manufacturer Contact Information