Phoenix Model 1/6 Dolphin Mk2 .46-.55 GP/EP ARF 63"

Tower Stock# PMMA1250  •  Manufacturer Stock# PH126
Easy Pay
Request 2 Payments ($63.50, $63.49) Details
Money Saving Combos
Money Saving Combos
 
LZ0150
 
LZ0151
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly Dolphin Mk2 1/6 scale Airplane from Phoenix Model.
For intermediate pilots.

FEATURES

Construction: Balsa and ply
Wings: Two-piece with NACA airfoil, aluminum wing joiner
Aileron Control: Dual servo
Covering: Hangar 9 UltraCote
Landing Gear: Prebent aluminum, tailwheel spring, 2.5" (63.5mm) main
foam wheels, 1" (25.4mm) rubber tailwheel
Wheel Pants:
Spinner: Plastic 2.3" (58mm) diameter
Fuel Tank: 12oz (355cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

INCLUDES

ARF Dolphin Mk2 Trainer, Landing Gear, Wheels, Engine Mount
Motor Mount, Wheel Pants, Fuel Tank and Instruction Manual

REQUIREMENTS

Radio: 4-channel minimum
Servo: 5 standard,: 2-aileron; 1-elevator; 1-rudder;
1-throttle (if using glow engine)
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For electric power;
Brushless Motor: Rimfire .46 - .55
ESC: 50-80A, to match selected motor
LiPo Battery: 6S, at least 4000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment
Glow Power;
Engine: .46-.55 cu in 2-stroke, or .52 cu in 4-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

SPECIFICATIONS

Wingspan: 63" (1600mm)
Length: 50.5" (1285mm)
Flying Weight: 6.2 - 7.05lbs (2800 - 3200g)
Wing Area: sq in (40.1 sq dm)
Wing Loading: (78g/sq dm)
Wing Type: Semi-symmetrical
Configuration: Low wing
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 2.9" (75mm) back from the leading
edge of the wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.31" (8mm) 10% Expo 0.39" (10mm) 10% Expo
Elevator: 0.31" (8mm) 12% Expo 0.39" (10mm) 12% Expo
Rudder: 0.98 (25mm) 15% Expo 1.6" (40mm) 15% Expo

COMMENTS

Following are the colors of Hangar 9 UltraCote used, and order
number for 6' rolls:
Grey, HANQ1139
True Red, HANQ1118
Yellow, HANQ1141
Deep Blue, HANQ1127

jxs 03/19/15
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information