PowerBox Systems 4710 Royal SRS w/LCD GPS Sensor Switch

Tower Stock# PBSM1003  •  Manufacturer Stock# PBS4710
Easy Pay
Request 2 Payments of $374.50 Details
Notes from our tech department:


Integral iGyro, triple-axis gyro system with heading function and
set-up assistant
Special regulatory algorithm for fixed-wing model aircraft
Unrestricted channel assignment for all 24 PowerBox outputs
Six independent gyro outputs for 2x ailerons, 2x elevators, and
2x rudders
Support for three battery types, LiPo, NiMH / NiCd, LiFePo
Special regulatory algorithm for fixed-wing model aircraft
GPS-regulated gyro gain
Six-axis MEMS sensor
Integral delta and V-tail mixer
Flight recorder, recording of lost frames, fail-safe events and all
battery data
Six programmable outputs for door sequencer with set-up assistant
Graphic LCD screen with 128 x 64 pixels
Servo-Match function, servo center, end-points and reverse for all
24 servo outputs
PowerBus, 2 outputs, 16 + 2 channels, compatible with other servo bus
Separate voltage and capacity display for each battery
Variable frame rate, 9-21ms
Direct transmission of all battery, receiver and GPS data to the
Updateable with PowerBox Systems USB Interface or BlueCom adapter
Large-area heat-sinks
Double-regulated output voltages for receivers and servos
Three year limited warranty through PowerBox-Systems beginning at
date of purchase


PowerBox RoyalLCDS Triple Axis Gyro System
LCD screen with GPS
Sensor Switch
Two 3-core patch leads
Four Retaining Screws
Four Rubber Grommets/Brass Spacer Sleeves


Operating Voltage: 4.0 - 9.0V
Power Supply: 2S LiPo/LiIon, 2S LiFePo, 5S NiCD/NiMH
Current Drain Power-on State: 158mA (with LCD)
Current Drain Standby: 30A
Maximum Load Current: Peak 4x20A
Drop-out Voltage: 0.3V
Output Voltage: 5.9V and/or 7.4V regulated
Signal Input: Serial
Supported RC Systems: Futaba, Spektrum, HoTT, M-Link, JR Propo and
Receiver Redundancy: SRS
Channels: 18
Servo Sockets: 24
Servo Signal Resolution: 0.5s
Signal Frame Rate: 9ms, 12ms, 15ms, 18ms, 21ms
Integral Gyro System: iGyro
Gyro Regulation: Heading and Normal mode
Gyro Sensor Type: MEMS
Number of Sensor Axes: 6
Screen: LCD backlit
Dimensions: L, W, H: 5.3 x 3.2 x 0.79" (136 x 82 x 20mm)
Weight: 5.6oz (160g)
Sensor Switch Weight: 0.53oz (15g)
LCD Screen Weight: 2.3oz (65g)
Temperature Range: -22 - 167 (-30C - 75C)

jxs 10/15/18


Manufacturer Contact Information