Zenoah G26 Marine Gas Engine

Tower Stock# LXYLG7  •  Manufacturer Stock# G260PUM
Zenoah G26 Marine Gas Engine (large view)
Easy Pay
Request 3 Payments ($116.67, $116.66, $116.66) Details
Notes from our tech department:
This is the gasoline powered, water cooled, two cycle
1.6cu in (26cc) Zenoah G260 PUM Radio Control Marine Engine.


Three needle floatless Walbro carburetor with diaphragm pump allows
fuel tank to be mounted in any position
Cooling jacket
Pull starter


Zenoah G260 PUM Radio Control Marine Engine with Carburetor, Plug
Wrench, Champion R27C Spark Plug, Plug Wrench, Air Funnel and
Gasket, Muffler Gasket, two 5x50mm Screws and Instruction Manual


Gasoline: 87 octane or greater
2-Cycle Oil: Klotz makes a synthetic 2-Stroke Oil for R/C
applications (KSFP0310), mix ratio for this engine is 25 - 40 parts
gasoline to one part oil
Gasoline safe fuel tubing, GPMQ4135
Exhaust system depending on application
Muffler - we recommend SUPG1565


Idle Speed: 3500RPM
Max Power: 2.16/12,000RPM
Max Torque: 1.94/9,500RPM
Displacement: 1.6cu in (26cc)
Weight: 3.3lbs (1520g)
Distance/Pull Starter to end of Front Crankcase: 5.6" (142mm)
Distance/Pull Starter to center of Engine: 3.4" (87mm)
Cooling Jacket Diameter: 2.1" (53mm)
Height/Starter Attachment Plate to Tip of Spark Plug: 7.1" (181mm)
Height/Center of Engine to Tip of Spark Plug: 5.4" (138mm)
Distance between Mounting Hole Centers Side to Side: 3.7" (95mm)
Distance/Mounting Hole Centers Top to Bottom: 2.5" (63mm)

Carburetor Settings-
Carb is factory set, readjust only if engine is running incorrectly
Idle Screw: Turn clockwise to increase idle and counterclockwise to
decrease idle
Low Speed Needle: 1/4 turn open from maximum RPM position
High Speed Needle: 1/8 - 1/4 turn open from maximum RPM position

jxs 03/30/10

Parts Compatibility
Easy RC: Engines
Manufacturer Mailing Address
Additional Manufacturer Contact Info